Civilization 3 does not run in 800x600

---

Installed the game Civilization 3 on my computer but it just runs in 1024 and since my monitor is 14 and older the game does not run right, anyone knows a way to change the game resolution since it has set.

Alcatel PPPoE

--- Anyone know how to configure the Alcatel Speed ​​Touch Pro w / efeturar automatic authentication using PPPoE Speedy

--- I do not know this modem pppoe

Overclocked Duron 750 x K7VTA-B

--- I have a Duron 750 and a Soyo K7VTA-B, and I wonder what is the best way to overclock ... Voltage, fsb, it is necessary to unlock the processor, etc..

--- I've had this same CPU in the same Mobo. With voltage at 1.75 clocká got it to 935 mhz. (FSB 110, multiplier and 8.5). If your model has not been connected with the L1 factory, you have to connect them (there are numerous guides on the net how to do it) if you change the multiplier. ---


Taking advantage of this same topic I was trying to make some hj overclocks the processor of the machine signature. The processor series Akca UNLOCKED. However the multipliers do not respond properly, only closes at 850MHz (8.5 X 100). The downclock tb ñ worked, anything or 5.5 x 6.5 x 6x 7x
I tried in 9.5 x 9x 10x but it is only at 850MHz or sometimes the machine does not care. Another thing which would put the voltage to the multiplier at 10x, I stopped in at most v 1.7 but not at 850MHz signal is always at the most ... Help me
al
Thanks

--- I think the graphite did not okay the way is to connect the bridges again.

Cutting the Cabinet

--- How can I do to cut the cabinet to make a window, but not a normal window ... I was thinking of cutting in a specific format, in my case, a format of an ET ... The saw tico tico do this

--- I recommend bringing in a professional staff that makes it as tinkers, tried to make a hole in mine and ended up almost ruining the cabinet for final. ---

Still, you used the saw tico tico Do you have any tool I can use to do it at the office I do not care about my chances ... I like to live dangerously ... : Wink: I think

q --- yes, old.
Jigsaw h blz, qqr thing, a good old grinding can help> ---

Give a look here: http://hw.metku.net/index.html sect=view&n=1&path=mods/imageikkuna/index_eng
The kra made using a Dremel.
< BR> Falow!

--- What is a Dremel The Megaman that the guy did was very loko ... It was about this scheme that I wanted to make my etzinho ... huahauhau ... Good, in any event, where u and can purchase this equipment ---

Dremel is actually the mark of a micro-grinding, helped a lot
Remember that TV show that sold everything And you won five hundred "gifts" Now just remember the tool that cut to nail ... ehehe remembered
If you do not recalled, never saw this commercial, or want more information, take a look here: http://www.dremel.cl/brasil/
Falow!

--- If you are interested and live in SP, it has to sell the peg and Do in São Paulo, costs about 200 reais ...! : Roll: ---

I'm grinding in order to buy one ... not just to casemod, but it breaks a limb to do several things at home .....

--- Device that cuts to nail that went on TV You're not talking about the Ginsu knives, right : Wink:
Puts, 200 reais is very expensive ... Do not give to make these types of court with details about it : :

--- I have one, is a wonder, if you have patience, you make something that even God duvida.Tem a guy who ta selling a kit Dremel.Olhem there in my office already to getting bullet to disassembling it to grind up the corners more difficult, and I'll buy a compresorzinho to be able to apply the sealer (which promotes paint adhesion to the plastic) and I paint the black plastic parts, and inside I do not know still the same black or silver or gold) And I already have bullet in front of CDs, floppy driver,

photo 1 photo 2 photo 3

photo 4
---
Link to review of Dremel.
http://www.thinkcomputers.org/reviews/dremel.html

--- Wow, I guess I'll take a look and find even a dremel ... the name is micro-grinding, right Is it very sturdy

--- Yes, it is very tough, even prefer the dremel (the Bosh) has another micro-grinding is a Black & Decker vermela.Procure by Micro-grinding, and you found the Dremel ( Bosh's) or multi RTX (I think this is the name that is Black & Deker.Na time of the U.S. dollar to 2.60 I paid 265.00 if Sampa I give a touch, I know a guy that selling one, I see the price if applicable.
---
the submarine is a real selling the 160 micro-grinding with various accessories. the mark is black & decker.
ñ am propagandizing, I'm just trying to help.
won!

--- forgot to post the link .... hahahahaha .....
forth.
http://www.submarino.com.br/tool_productdetails.asp Query=ProductPage&ProdType .. Id = 15 & ProdID = 159814 = 103790 & franq
won! < BR> ---
Ha ta, but is Black, but it is even cheaper, the Dremel is better, stronger That is why more expensive, Ha, got to see the numbers of accessories too, Dremel has 3 versions. < BR> --- I'll buy that same
! (or rather, my girlfriend will buy me! he he he 8)) ae present just this rulez!
I get up to Saturday, then I put it liked it or not ... --- Q

after buying and testing, post here if it is good or ñ, etc. ...
tmb am interested in buying ....
Won!

--- Does the black does not account I'm not very picky ... If Black can do the same service as Dremel, then blz ... : Wink:

Page 3

--- For those who are interested, here is the site of the dremel:
http://motoferr.com.br/dremel.html < BR> ---
Staff, went to the street Florencio de Abreu (Sao Paulo) and I've been watching prices for various stores and such. Dremel 395 and tested the B & D RTX1 ... ultimately prefer much more to B & D, 160 I think it was real. I talked to some vendors and they told me that B & D has been sold far more than the Dremel, and it is not because of price (50 real difference). Apparently the Dremel is not even pleasing staff. She is more "fat" and a little heavier, and the "footprint" it's too bad, I can not explain ... testing only it. Overall, the box of RTX1 is prettier!
I'm cutting an old office aki to do tests ... I'm trying to make the "U" Unreal Tournament (r0x too!). Unfortunately I can only modding on weekends, they are still not all. I got a digital camera from a friend and I will take some pictures to see how you guys are getting ... is lopsided for a while but then I end up sanding and everything will be. Probably next week I post the photos ...
is this "U" here ...


--- It's just asking what is best Bosch or Black , for any seller Florenço.Ou see the warranty, 2 years and 1 year Dremel Black. (factory)
Dremel has induced roletado, Black embuxado.Dremel, a market leader in EUA.Realmente RTX is thinner, but each purchase whatever you think best for themselves.
PS.Como so "real 160.00 if I remember correctly " Do not you bought

--- Look, you said that B & D was costing 160 Florencio de Abreu in right Well then I guess I'll ask my Internet right ... 160 in the submarine, and they still deliver at home 8) I read there site that many people have approved the product, but as I know I can not say much ... Tests then the B & D and talk to us if it is good or not to make these cuts with details ... : Wink: My
---
arrived yesterday, I bought (in fact, won) for the Submarine (total U.S. $ 166 with shipping, etc..). The request was made at midday on Wednesday, Thursday morning at 9 had already arrived (I live in Sao Bernardo do Campo).
Funny that I was opening the box, my father asks: What is this Then my brother replies: It's like I have a Dremel.
***! Dremel had a home and I did not even know! HAUAHUUHUAH
Well, I do not know the Dremel, but RTX has a very good finish, it is really easy and comfortable to handle, at a speed (approx 8000 RPM) you can use like a pen. In the six-speed (approximately 30,000 RPM) looks like a drill. As I have not had much time to move, did not do much (just cut two fingers, the dog's tail, the front axle of my dad's car and stuck the piano from my mother ...) Tomorrow I
I'll play more with baguio and post here ...

--- Whoa, look at that huauhauha wanted to see the face of your father and your brother when you opened the stuff hehehhe, pow then you can say about the two, which will more Dirar etc.To laughing until Now imagine the guys from "not to understand no *****" when you bought another mini rectifies
hehehe ---
Detail Menassa, I never saw such a Dremel of my "brother", let alone use. .. united family eh he he he
But as my father, who the hell is a man if you do not have your own tools He he

--- Well, since this is so, I think I'll buy the same D & B ... hehehe ...

Arrived today --- my micro grinding of B & D. .. I bought it on the sub ... Well, I only had one problem: the role came along I described explicaçãoq wrong parts, and I ended up using a blade for cutting mild rather than the blade to cut heavy materials, and broke a blade right away: cry: Well apart from that, I found very good player, very fast even cut and is very light ... It was the first time I cut my office, I had never done before, and have spent only two blades today ... I have a question: What is the right way to cut I have to go cutting the office at once, type the path marking and tuning up the metal, or I have to first open one cutting the hole and go from there Does anybody know : :

--- 1-I risk where it should be cut first.
2-I cut a bit of risk inside and then finish with a buffing wheel (one of the best acababento)
but this is for anyone who is annoying as I do not really need to keep cutting and retinho lisinho, because the profile in "H" will hide those imperfections.
3-I think the kit does not come with the Black album cutting of glass fiber (Dremel not come too), that does not break like normal (I decided to buy after they broke a record and a piece flew into my eye, so that was wearing protective glasses).

[url = http://igspot.ig.com.br/menassa/discofibra.jpg] photo album [/ url

--- 1-I risk where it should be cut first. < BR> 2-I cut a bit of risk inside and then finish with a buffing wheel (of a acababento better)
but this is for anyone who is annoying as I do not really need to keep cutting and retinho lisinho, profile because the "H" will hide those imperfections.
3-I think in the Black kit does not come with the cutting disc of glass fiber (Dremel not come too), that does not break like normal (I decided to buy after I broke a record and a piece flew into my eye, so that was wearing protective glasses).

picture disc

--- To tell the truth fiber Glass came yes ... But it serves to cut metal It seems to be so weak ... qualqeur the way, I'm afraid of breaking that she only came this one ... By the way, if I need more blades, where can I buy Any hardware store sells
Lisinho How to get, I do not know ... I used a file and scraped in the same hand ... lisinho was well, and zuou or anything ...
PS. :: It's normal to go out as much sparkle when you're cutting : Roll: ---

you sure that is the fiber You said what appears to be feeble and fiber is very tough, can handle it and try to break it but it is ****. Yes is normal spark sim.Vc find out more disk in big stores like Leroy Merlin, Peg Do, Leroy onibra etc.Na e'o place that has more variety, has a huge closet of parts, in addition to any cover they offer, if you find it cheaper they cover the offer.
see photo of two blades of photo albums

--- Hmm ... you have an idea of ​​the price of blades: :

--- I'm not sure, but it was at most 5 or 10 dollars each disc media, packaged in a tin 5 disquinhos.Cortei mass polishing paper like hehehe, time will to take something and cut because it's nice to see the same knife to cut bixinha Mantega.

--- Are you referring to fiberglass blades right It also sparks the same
For those who have the micro-grinding of B & D RTX, can you tell me what the best speed to cut the cabinet In the manual they say to use the speed between 5 and 6, but spent my blade in 2 minutes, and another just broke ... I'm now using a speed between 3 and 4, it takes much more to cut, but at least're earning a little more depth as well ... already cut almost the same as before (using the high speed), and the blade's still inteirinho ...

--- I think you did not read the disc fiber does not break easily, should be using the disc errado.olha the photo and see the difference,

--- No need to ask . The answer is: you do the best job.
Bought. It had a rebate, can not remember exactly how much was for sure ... but it was around 160.
Exactly. I had almost paid the Dremel, but unfortunately it was with a friend at the store, and in the end he opened his eyes and took the B & D. I wanted a Dremel anyway, just because it has a name, even though he liked most of RTX. I do not regret, because I tested both. What I really did not like the Dremel was the "footprint" .. you can not hold like a pen with the same ease that the RTX.

--- To do what I did, I spent 23 of the 25 disks "heavy duty". Either I'm retarded, or they spend it quickly. I'm just waiting for a buddy of mine of the School "revealing" photos from your digital camera.

--- And I thought it was just me ... To make the cuts I'm taking a long time ... I think it's taking a poko more because I'm cutting with a lower speed, to avoid breaking the blade .... To using a speed between 4 and 5 on the average. To make some parts with more pronounced curves I'm suffering a poko ... It's kind of tricky ... Oh and one more thing ... To conclude, after cutting, I'm using that sandpaper that came with the RTX ... Do not know if it's correct, because she already got a hole ... huahuahua ... The sandpaper I'm using to make some finishing touches to cut and remove the remains of metal that were ... I think even that is getting nice ... But it will take a caaaaaaaara to get ready ... 8)

Page 4

--- Better to have bought a tico tico hehheheh.Compra a fiber colleague.

--- I finally cut the office ... I think I took practice, because I was using the same Lemina "Heavy Duty" and got cut almost double what the first cut with the blade, and in less time. When I finished I try to post a picture ... I even painted ...! hauhauahua

--- Friends, I hung up super-tou, these micro-grinding, cutting yourself, or only serve to grind If you cut, which the heavier stuff that I can cut it

--- And then I use a knife or sandpaper know, it ends and I have to buy another set of blades only without the dremel ---

Micro-grinders come with a lot of accessories for many different purposes. You can cut, grind, record names, eculpir, several things. To cut, you can use the blades that can cut a quiet office or even a lock ... As the manual says "just do not try to micro grinding for sawing a tree" ... (But you will not do that, right : Wink:) ... Well, when the blades wear out or break, whatever, you can buy more blades ... I think we should sell hardware store maybe ...

--- I spent three to cut the cabinet and the exhaust grills ... I use the micro grinding to 25000 rpm, which incidentally, is the max that my PC can rectify when ..... material is thicker, I prefer to use the Tico-Tico ...

--- Male is male does not use Dremel or any micro grinding, just a male uses this here (click) to make holes in the cabinet

--- [quote = Menassa] Male that is male does not use Dremel or any micro grinding, male uses a logo [url = http://www.ekipe-c.com.br/im ... [/ quote]
I use plastic explosive ... It also has
this more delicate:
http://www.2cooltek.com/case001.html

--- in my case I used 320 grit sandpaper, varnish and metallic automotive paint, was Excellent, then took another coat of varnish to be shiny, and I always automotive wax. ---

Photos like this becoming my full tower.

Photo 1 Photo 2 Photo 3

---
saw as a diagnosis -tor
want to cut a rectangle in my office to put the acrylic. --- Look

my tools, the tico tico is the first left, black.
Tools
Ferramentas2

Share with ICS (Server and client win98 XP) w / BroadJump

--- I

a peer network. Server Win 98, Win XP client.
Always used the wingate to share and always worked perfectly, now I'm trying with the ICS, as I always say it's the best!
Here comes the problem, start the installation the PC server, it asks for a file CD BroadJump, I put the cd and it does not find the specified file (extension. inf) then gave a skip.
Dai follow on .... I put a blank floppy to copy the file and install the client.
When trying to install the file from the floppy in XP, it says it needs the win98 or 95, which way to install the ICS, or another way to share the connection between these two PCs
PS: I'm trying the ICS because I spoke with him I can connect to server to play counter strike on the client, which I could not with wingate
... I hope you can help me ... : Wink:
Hugs. ---

Not quite understand your question, but it would be better to use XP as a server

--- The cable is long, the assembled structure of pro speedy not to change now.
The PC server is a P II 450 MHz, so do not think it's good to install XP on it, and also I can not change place PCs, as I have to be asked in the topic
same guy ... Thanks .... ---

Not need to change the computer, but try the following run the network wizard in xp, create the floppy disk and runs on win98, xp report in during the wizard that he shares the Internet by the network card and in win98 it receives via direct internet wan
--- From
to do so The client (XP), remove the disk and install on the server (win98)

classes of TCP / IP Network

--- Personal
Hello ..

Addressing Network using TCP / IP was divided into five classes being
Class A: 1-126
Class B: 128-191
Class C: 192-223

Now the question that begs not ..... And the Class D and E for serving
Ate more ..... ---

Snif ... : Cry:
Classes D and E are not for commercial use. Class D is for multicast systems. You can only send data to a machine that is configured to q.
Class E is for testing new implementations in networks based on TCP / IP
PS: Where are you Vebea: :: roll:

Connecting the HD ....

--- Oh

guys, when you turn on the HD ribbon cable, is there any priority to connect the HD in some of the tips or whatever.
Type in a cable with three connections to the longest always going on board and Hd is the tip shorter in relation to the connection means, or it does not matter

S and there is a difference please call me convimcente deem an explanation, because so far heard no q convinced me .... Thanks guys


--- Take a look aquihttp :/ / www.X255.info/curso...cabos_flat.asp

Preventing them from entering the single

--- I once read in a magazine (which mine was not, and do not remember which) a way to prevent users from entering single mode. I could not figure out how ... and has a few machines in Facu we had to see it ... does anyone out there know
distro in question is the Slack. ---

Hi lady moon tudjo bao = o)
good come
option I know to this problem would you put a password in lilo in which he inicializaria not the BOOT without the same password is entered, great for sevidores the problem is that she always sought EVERY boot.
to do this you must edit the lilo.conf < BR> and add the following line
PASSWORD = 12345
ok then save lilo.conf and lilo type
bio Jaspion @ # lilo Added

SlackRox
* FreeBSD 4.6
Win2K
this way it will not effect the Boot that is typed in the password ok
Slackware 8.x by not allowed to come in standard single mode without having to type the password it loads
Single mode but at the end of the load
Welcome Jaspion
login :

--- According to my classmate room (according to him I say because I have not seen it, he told me q) gives to enter:
linux single init = / bin / bash rw
only one area lah eh .. PC with slack 7 h, with eight others, others with another version that I do not know what eh .. hehehe ..
good, if not really have to stop this business there, I think that the lilo password may serve me. .. ---

Up ...

--- Okay, there is even an area, you may not be makinas some slack .. and if it is not slack, as I clay the single although I'm pretty sure that all are slack, even though some older versions have
---
see what are the possible entries for the single mode:

linux single linux - s
linux1
linuxone

I only know this!
lah in lilo you copy all the lines for a label! and do as - Bio =] [= azarD - said
adds each end of each part ...
password = algumacoisa
saved after exit
type in lilo bash
Falat and even chmod: # chmod 000
lilo.conf
the naum so that no user can see the contents! Why else it will have access to the password!
I have helped, the explanation tah somewhat vague, but you must desenrrolar the rest! I only know how to do so, has a way to make lilo more secure anymore I do not remember how to do!

How to cut acrylic sheets

--- Well, I've been concerned about these very matters on case mod, but I still have one question: how do I do to cut acrylic sheets used as windows What tool can I use for this
And one more question: what is the best paint to paint the cabinet I've seen many suggestions here, but do not want to risk it. And then, should be two types of paint: to paint a metal parts and another to paint the plastic parts of the computer ... Suggestions : :

--- I use to cut jigsaw with a guide in order to make the cut straight, the paint you can use automotive paint plastic parts that you must first pass a sealer, then a primer, sanding and then paint using spray paint and use an airbrush for detail, the procedure for plastic parts is the same to paint the bumper of a car.

--- I have wanted to know how to hold the acrylic plate on the lid of the case.
Won! ---

Uses rubber profile in the format H or S. .. H is the best, is a more beautiful finish ... looks
aki how to ...
Http://www6.tomshardware.com/howto/02q3/020724/pc_case-09.html
hug!

--- Yesterday I painted my only sanded with sandpaper all parts 320 and spray painted with a matte black, I'm pretty cool.
Know q is nothing professional, but it was good and cheap . hehehe
Now the question, paint with spray paint has a problem

--- Did not you have some pictures of it for me (or us) see (mos)
I like the idea of ​​painting the micro.

--- If you do not have a jigsaw, can lead to a skilled plumber who will do it with a blowtorch, which by the way, is much better than fret because of the finish
---
acrylic cutting torch 8O 8O 8O

--- q I like to paint the floppy drive and cut the acrylic cover and I shot a few otos and put here.
Unfortunately I can only paint the Label at the end of December when q is the warranty ends, al leave blank for now.

--- I cut with my soldering iron ... then took a lixadinha edges, very lightly, 'cause after all is inside and not seen. And the transparent acrylic used a clipboard for papers that I bought for U.S. $ 4.00 in stationery. ---

To do hurricane fan (yeah, right ... hurricane bore hole ... hehe) I bought a saw and cut glass of 79mm acrylic q or butter ... heheheh
cutie ...
gotta be very careful when cutting the acrylic to fret, because if the saw gives a quick getaway, goodbye new window! hehehe ... I went with drill drill the acrylic to guide the saw cup and clenched it all ... almost beeem then went in the morning ... heheh
Hug!

Attachments with names changed

---

Lately I've been getting some attachments, but are not all in all formats, are coming up with the truncated name. For example:
= iso-8859-1QPavo.jpg = or = iso-8859-1Qboca_abertaXXX.pps = h the pattern is always the same.
Anyone know what is causing this
Ja spent the antivirus and not get anything.
Use Win98SE, incredimail, Nav2002 and zonealarm pro.
The configurations of the zonealarm antivirus are disabled.

--- This should be differences in coding of message types European (Western) European (windows) etc..
Experiment by changing the encoding and sending e-mail to another account their own.
[] 's ---

Junim Thanks!
The Incredimail has the standard Western European (ISO) and Western European (Windows). The ISO standard comes as default and I had no idea that: oops:
tkz Problem solved! : D

CPU cooling-Help me

--- Guys, is there any other way of cooling the CPU, without being conventional coolers
Pq is seen a "cooler" half stoned, with water pump, hose to pass the water cooler's copper base, etc. ..
It really exists
if any, does anyone know where to buy

--- There was a guy selling watercooler here. He and quieter but not unless you want to make an oc ill in your comp, not worth it. --- In

PC 34 also has a radiator to proc. zen of this is also quite different and expensive. ---

Zen has a poor performance, is expensive and is a destroyer of processors, if you do not use a shim your processor goes into space.
Watercooler guy ta this link http:/ / www.SITEX255.net/viewtopic.php t=12743&highlight=watercooler

How to update the BIOS of a pc chips m766 Mobo

--- I have a pc chips m766 Mobo and wanted to upgrade the BIOS but do not know how.
I wish someone could explain to me how to upgrade.
I went to the site of PC chips and did not find any files to update, where can I find this file exists or not upgrading to this board
Thanks, Marcio.

Disk boot

--- How do I create a boot disk for win95 with CD and programs like fdisk --- From

win95 does not support CD.
Uses the win98 that runs without problems to install win95.
[] 'S
- -
Create a boot disk normally.
Edit CONFIG.SYS to call a controller (or other type cdrom.sys).
tb Edit autoexec.bat and add the command line mscdex ( Give a mscdex / for options).
Restart the computer and go for it.

---
Junin and friends
Give yes, picks up the file to the win95B the link below, but before you format a floppy disk, then just click over to the executable you downloaded it will automatically mount a cd boot with support for

luck --- To support the CD, and much easier you use the Win 98 disk.

--- Yes I agree, but in my case I do not know why charge d'agua, when I used the boot disk from Win 98 and I did not accept the CDROM when I typed install.
< BR> Do not ask me, but gave a big headache for installation at one o'clock PT 166MMX. if I tell that I had to vc'so defazer a real juggling act to install the system, you would think it's that I'm crazy.
But anyway these days to move back in the blessed and decide to get the Win 98SE as was very slow and I installed Win 95B, but not as abixeira insisted aceirtar the command install directly from CD, and I even changing the Driver CDROM I tried using the Xcopy ME Boot Disk to copy the entire contents of the CD and try to diretamento install the HD, but it gave error not compatible version of Of something to that effect.
Then I found a boot disk and copied Win95B all your content from CD to HD, is not that miserable accepted the command install directly from CD, almost caught in this unfortunate taquei Pararede, let me lose days trying to install the system.
are something that has no explanation. Although

--- q to install the win in any version is not necessary to copy the entire cd. Just copy the files at the root q. The executable (setup.exe), the cabs and a few others ... It's all in the root! ---

And tb and the best boot disk is q.

What is the problem with my HD 2Gb

--- A friend of mine gave me a HD Quantum Fireball 2GB and when I do a ScanDisc it crashes every time in the same place and have to reset the computer.
I copied a movie in HD and put to run and the film also caught.
What is the problem of HD has
how to fix How
Thanks, Marcio. --- There

Marcio Estor here with an HD of 600 Mbytes and a few with the same defect scandisk always enters and locks in 6% after it appears a blue screen saying a fatal error, there was no way entering the win.
I did the following, I went into FDISK and delete the only partition that was created after I activated a new partition and finally formatted and ready to ha.
Well now you just need to install the win, the still could not do for lack of a CDROM that has pc, tbém not have the win98 diskette.
Speaking of diskette you will need a floppy boot win 98
if you have not to do using the FDISK and FORMAT, ok. ---

Marcio was forgetting, I put a thread asking for help tbém staff told me, and you can read to help you tbém,: arrow:
http://www.SITEX255.net / viewtopic.php t = 11419 ---

Wheel scandisk from DOS with parameters "/ autofix / surface." This instructs the scandisk not to question about the correction of errors and automatically enter the test surface.
In a case like yours would not be surprising to receive an error like: "stack overflow, change the setting in CONFIG.SYS STACKS and try again." If this happens
Make a backup of what is possible and replace the HD.
I hope I have helped. ---

Already formatted the hard drive several times to try to resolve the problem even used a program called FILL ZERO to zero the HD and when it reaches the end of the process a message that the HD is defective. Does the HD was already, can not recover it
Now when I enter the windows and put on the properties of the system appears my HD 10Gb and my friend gave me 2Gb installed, but when I go in windows explorer HD 2Gb does not appear.
I'll try to use such a disk maneger to see if I fix the problem.

Tutorials on ATM Networks and Fiber-optic

---


Hello everybody .... I'm looking for information on techniques and fiber-optic ATM Networks ... I found some interesting pages on yahoo, but still leaves much to be desired ..... I wonder if someone can show me a cool website, or has some stuff about ... Ate
staff .... --- Actually ...


Find all in one place is difficult. You have to pick up the pieces, join and assemble a tutorial ... Try these


--- Is there a website where you can find all these handouts and other related networking and telecommunications.
: Idea: This www.projetoderedes.kit.net
is the site of a degree in computer networks Volta Redonda RJ I do.
addition to handouts, also has tips, links, drivers, news and more. A hug


--- Wow! I burned my tongue ... hehe! Very good site that is already in my favorites, thanks!

LX-300 printer, Windows NT4.0

--- C
I wonder someone can help me giving this a problem with a printer LX-300, it is not printing, has a message that does not find the file I am using Windows NT4.0, appears an error 1058
some can help me thank


--- If I mistake not the NT does not have native drivers for LX-300, you must use another model printer (the Epson), the problem is I forgot the model q! --- And


ae .... Try doing the following ... install a printer manufacturer and model is called Generic Text Only ... is to work.

spoke

--- Use the generic:
LX-400 show work got
Hugs

Internet Sharing with Linux X ******** (squid)

---

Squid installed but not working!
If you guys have a version confialvel pass me the link, and precise configuration of tb.
A Mandrake 8.1 machine that that is installed squid
Machine 2 Windows 98se -> this is that I will use the share of the squid, put the port 3128 in the proxy configuration.

I configured according to tips from Morimoto (which is kind of partial to beginners like me for example) but inhenheca pitibiriba of "no work" may be the rpm that is grubby.

--- Does anyone know!

Va --- the official website of the Squid and download it in tar.gz format
---
already installed again, give me some tips, configuration and testing to see if it works cool .
If you must make settings in linux I pass e.
Valew

--- There in my bookmark has a section with some links of the squid gives a sought there. www.mutlley.hpg.com.br

Destination Host Unreachable - Notebook PCMCIA RH7.3

--- When

ping any ip:
Destination Host Unreachable - Notebook PCMCIA RH7.3
What is it ---

Of a look at your default gateway route-r

how to know what kind of eh my adsl

--- Hello


staff would like to know how do you know what type of ADSL (fixed or naum ip).
Have to change Or they naum maai do that

--- Do you need to authenticate to use the net If the answer is positive, it is dynamic IP. If not, is fixed.
If fixed IP, stay in your corner. If it is dynamic, there is no change ...
Wow
turned a nice exercise in logic programming ... hehe!
--- C
change does have will have to sign an ADSL service business much more expensive than the home is the advantage you have when your IPFixo
--- Bio
Speak!

Yeah. But I've been reading a topic q intrigued me, take a peek ... http://www.SITEX255.net/viewtopic.php t=14410

--- answer me how you connect, and how much you pay and I'll tell you what it is ---

hello, your kind of dynamic IP ADSL can be .. (Q u p uses software to connect to the net, eg Broadjump and your IP is always changing), q is fixed and you have a unique IP and does not need to authenticate the program, hugs

Vinimc3001 ---

al
led my connection eh no authentication and only put the numbers in each ch of dns. The modem is plugged into the hub
But I think my ip naum qo h pq fixed naum every time I turn on the pc again it changes the external ip. Tb naum can not even create a game server or ftp (but guess it can be locked doors ( ))
When I create a game server for example, but usually it creates naum know what ip to send others come as no it works
My adsl ip dinamio neh eh
earned

--- luiz, then you should be PPPoE NAT should have done, there need not c authenticate the program p, but their IP mud aa increasingly connects q PC.abraços
Vinimc3001

--- luiz, then you should be PPPoE NAT should have done, there need not c authenticate the program p, but their IP mud aa increasingly connects q PC.abraços
Vinimc3001
---
must be earned entaum

---
available, Luiz, I'm new aki this SITE, and I want to make new friends with a nice eq guys can discuss various issues in a constructive and healthy, no doubt, post-q I can help you, hugs
Vinimc3001

--- which brand of your modem, it can be configured depending on and opened the doors.

--- Hello, look I'm using dial-up lately .... qndo but lived in St. Paul used Speedy was my SpeedStream 5600 modem and never had problems with it, and Speedy do you use hugs
Vinimc3001
--- vcs
doing so confusion ... ip (ip hot valid on the Internet) provider that delegates to the MODEM can be fixed or dynamic. If you MODEM forwards this IP to your machine (and you need authentication for internet access), he is working as BRIDGE, otherwise it's a ROUTER (which does not require authentication manual) ... on IP, is as follows: the sum is the most expensive, cuz lets you record this in ip FAPESP, and it has a domain. The dynamic was at work as dial-up, changes constantly, and has ports FTP, HTML and more blocked. If your modem is in ROUTER, the second ip, what MODEM delegates to the internal machines (in this case, yours, and perhaps others that are connected via a hub on the modem) a ip is called "IP COLD", cause he just goes for the internal network. It can be fixed or dynamic, depending on the configuration MODEM. If it is the internal DHCP server enabled, each machine that is connected to it will get an ip, dynamic, usually 192.168.xx. band. Otherwise, if it is with DHCP disabled, it will only have to use an ip, the ip will be used by internal machine (your PC). But it all depends on the model of your modem supports routing and dhcp server.
Report Inappropriate
Hug

--- q I messed up one, you just gave a more detailed explanation. ---

Thought ... is that anyone reading this forum could be confused in the history of ip ... Good, I hope you naum!
hug!

Doubt on ICQ

--- I'm new to using the ICQ software. When I find someone, either name, nickname, or city have the option of the ICQ I will only list the users .. But even with the option checked he lists all .. What do I do
Thank you. ---

Kro colleague Wolfstein,
I'm pretty sure the moderators will move your message to the area of ​​software and of course, you'll get a better return of your question there.

Cheers, Marcelo Cruz
---
Amaralcruz, hit
About the doubt, it is strange that it lists the offlines too ... you're using a recent version ---

Should be bug ... for a change ... : --- And

bug in the ICQ server, even if you select him find only users online, he is finding todos.Eu not know what 's going on with the ICQ server, has it been a while that this is happening.

--- For a long time indeed! --- Strange ...


Some time ago it worked properly, I would even disagree with all of you, but to make sure I did the test now. The result was the same you guys said.
Use version 2001b, this never gave me a headache.