---
Installed the game Civilization 3 on my computer but it just runs in 1024 and since my monitor is 14 and older the game does not run right, anyone knows a way to change the game resolution since it has set.
domingo, 12 de agosto de 2012
Alcatel PPPoE
--- Anyone know how to configure the Alcatel Speed Touch Pro w / efeturar automatic authentication using PPPoE Speedy
--- I do not know this modem pppoe
Overclocked Duron 750 x K7VTA-B
--- I have a Duron 750 and a Soyo K7VTA-B, and I wonder what is the best way to overclock ... Voltage, fsb, it is necessary to unlock the processor, etc..
--- I've had this same CPU in the same Mobo. With voltage at 1.75 clocká got it to 935 mhz. (FSB 110, multiplier and 8.5). If your model has not been connected with the L1 factory, you have to connect them (there are numerous guides on the net how to do it) if you change the multiplier. ---
Taking advantage of this same topic I was trying to make some hj overclocks the processor of the machine signature. The processor series Akca UNLOCKED. However the multipliers do not respond properly, only closes at 850MHz (8.5 X 100). The downclock tb ñ worked, anything or 5.5 x 6.5 x 6x 7x
I tried in 9.5 x 9x 10x but it is only at 850MHz or sometimes the machine does not care. Another thing which would put the voltage to the multiplier at 10x, I stopped in at most v 1.7 but not at 850MHz signal is always at the most ... Help me
al
Thanks
--- I think the graphite did not okay the way is to connect the bridges again.
Cutting the Cabinet
--- How can I do to cut the cabinet to make a window, but not a normal window ... I was thinking of cutting in a specific format, in my case, a format of an ET ... The saw tico tico do this
--- I recommend bringing in a professional staff that makes it as tinkers, tried to make a hole in mine and ended up almost ruining the cabinet for final. ---
Still, you used the saw tico tico Do you have any tool I can use to do it at the office I do not care about my chances ... I like to live dangerously ... : Wink: I think
q --- yes, old.
Jigsaw h blz, qqr thing, a good old grinding can help> ---
Give a look here: http://hw.metku.net/index.html sect=view&n=1&path=mods/imageikkuna/index_eng
The kra made using a Dremel.
< BR> Falow!
--- What is a Dremel The Megaman that the guy did was very loko ... It was about this scheme that I wanted to make my etzinho ... huahauhau ... Good, in any event, where u and can purchase this equipment ---
Dremel is actually the mark of a micro-grinding, helped a lot
Remember that TV show that sold everything And you won five hundred "gifts" Now just remember the tool that cut to nail ... ehehe remembered
If you do not recalled, never saw this commercial, or want more information, take a look here: http://www.dremel.cl/brasil/
Falow!
--- If you are interested and live in SP, it has to sell the peg and Do in São Paulo, costs about 200 reais ...! : Roll: ---
I'm grinding in order to buy one ... not just to casemod, but it breaks a limb to do several things at home .....
--- Device that cuts to nail that went on TV You're not talking about the Ginsu knives, right : Wink:
Puts, 200 reais is very expensive ... Do not give to make these types of court with details about it : :
--- I have one, is a wonder, if you have patience, you make something that even God duvida.Tem a guy who ta selling a kit Dremel.Olhem there in my office already to getting bullet to disassembling it to grind up the corners more difficult, and I'll buy a compresorzinho to be able to apply the sealer (which promotes paint adhesion to the plastic) and I paint the black plastic parts, and inside I do not know still the same black or silver or gold) And I already have bullet in front of CDs, floppy driver,
photo 1 photo 2 photo 3
photo 4
---
Link to review of Dremel.
http://www.thinkcomputers.org/reviews/dremel.html
--- Wow, I guess I'll take a look and find even a dremel ... the name is micro-grinding, right Is it very sturdy
--- Yes, it is very tough, even prefer the dremel (the Bosh) has another micro-grinding is a Black & Decker vermela.Procure by Micro-grinding, and you found the Dremel ( Bosh's) or multi RTX (I think this is the name that is Black & Deker.Na time of the U.S. dollar to 2.60 I paid 265.00 if Sampa I give a touch, I know a guy that selling one, I see the price if applicable.
---
the submarine is a real selling the 160 micro-grinding with various accessories. the mark is black & decker.
ñ am propagandizing, I'm just trying to help.
won!
--- forgot to post the link .... hahahahaha .....
forth.
http://www.submarino.com.br/tool_productdetails.asp Query=ProductPage&ProdType .. Id = 15 & ProdID = 159814 = 103790 & franq
won! < BR> ---
Ha ta, but is Black, but it is even cheaper, the Dremel is better, stronger That is why more expensive, Ha, got to see the numbers of accessories too, Dremel has 3 versions. < BR> --- I'll buy that same
! (or rather, my girlfriend will buy me! he he he 8)) ae present just this rulez!
I get up to Saturday, then I put it liked it or not ... --- Q
after buying and testing, post here if it is good or ñ, etc. ...
tmb am interested in buying ....
Won!
--- Does the black does not account I'm not very picky ... If Black can do the same service as Dremel, then blz ... : Wink:
Page 3
--- For those who are interested, here is the site of the dremel:
http://motoferr.com.br/dremel.html < BR> ---
Staff, went to the street Florencio de Abreu (Sao Paulo) and I've been watching prices for various stores and such. Dremel 395 and tested the B & D RTX1 ... ultimately prefer much more to B & D, 160 I think it was real. I talked to some vendors and they told me that B & D has been sold far more than the Dremel, and it is not because of price (50 real difference). Apparently the Dremel is not even pleasing staff. She is more "fat" and a little heavier, and the "footprint" it's too bad, I can not explain ... testing only it. Overall, the box of RTX1 is prettier!
I'm cutting an old office aki to do tests ... I'm trying to make the "U" Unreal Tournament (r0x too!). Unfortunately I can only modding on weekends, they are still not all. I got a digital camera from a friend and I will take some pictures to see how you guys are getting ... is lopsided for a while but then I end up sanding and everything will be. Probably next week I post the photos ...
is this "U" here ...
--- It's just asking what is best Bosch or Black , for any seller Florenço.Ou see the warranty, 2 years and 1 year Dremel Black. (factory)
Dremel has induced roletado, Black embuxado.Dremel, a market leader in EUA.Realmente RTX is thinner, but each purchase whatever you think best for themselves.
PS.Como so "real 160.00 if I remember correctly " Do not you bought
--- Look, you said that B & D was costing 160 Florencio de Abreu in right Well then I guess I'll ask my Internet right ... 160 in the submarine, and they still deliver at home 8) I read there site that many people have approved the product, but as I know I can not say much ... Tests then the B & D and talk to us if it is good or not to make these cuts with details ... : Wink: My
---
arrived yesterday, I bought (in fact, won) for the Submarine (total U.S. $ 166 with shipping, etc..). The request was made at midday on Wednesday, Thursday morning at 9 had already arrived (I live in Sao Bernardo do Campo).
Funny that I was opening the box, my father asks: What is this Then my brother replies: It's like I have a Dremel.
***! Dremel had a home and I did not even know! HAUAHUUHUAH
Well, I do not know the Dremel, but RTX has a very good finish, it is really easy and comfortable to handle, at a speed (approx 8000 RPM) you can use like a pen. In the six-speed (approximately 30,000 RPM) looks like a drill. As I have not had much time to move, did not do much (just cut two fingers, the dog's tail, the front axle of my dad's car and stuck the piano from my mother ...) Tomorrow I
I'll play more with baguio and post here ...
--- Whoa, look at that huauhauha wanted to see the face of your father and your brother when you opened the stuff hehehhe, pow then you can say about the two, which will more Dirar etc.To laughing until Now imagine the guys from "not to understand no *****" when you bought another mini rectifies
hehehe ---
Detail Menassa, I never saw such a Dremel of my "brother", let alone use. .. united family eh he he he
But as my father, who the hell is a man if you do not have your own tools He he
--- Well, since this is so, I think I'll buy the same D & B ... hehehe ...
Arrived today --- my micro grinding of B & D. .. I bought it on the sub ... Well, I only had one problem: the role came along I described explicaçãoq wrong parts, and I ended up using a blade for cutting mild rather than the blade to cut heavy materials, and broke a blade right away: cry: Well apart from that, I found very good player, very fast even cut and is very light ... It was the first time I cut my office, I had never done before, and have spent only two blades today ... I have a question: What is the right way to cut I have to go cutting the office at once, type the path marking and tuning up the metal, or I have to first open one cutting the hole and go from there Does anybody know : :
--- 1-I risk where it should be cut first.
2-I cut a bit of risk inside and then finish with a buffing wheel (one of the best acababento)
but this is for anyone who is annoying as I do not really need to keep cutting and retinho lisinho, because the profile in "H" will hide those imperfections.
3-I think the kit does not come with the Black album cutting of glass fiber (Dremel not come too), that does not break like normal (I decided to buy after they broke a record and a piece flew into my eye, so that was wearing protective glasses).
[url = http://igspot.ig.com.br/menassa/discofibra.jpg] photo album [/ url
--- 1-I risk where it should be cut first. < BR> 2-I cut a bit of risk inside and then finish with a buffing wheel (of a acababento better)
but this is for anyone who is annoying as I do not really need to keep cutting and retinho lisinho, profile because the "H" will hide those imperfections.
3-I think in the Black kit does not come with the cutting disc of glass fiber (Dremel not come too), that does not break like normal (I decided to buy after I broke a record and a piece flew into my eye, so that was wearing protective glasses).
picture disc
--- To tell the truth fiber Glass came yes ... But it serves to cut metal It seems to be so weak ... qualqeur the way, I'm afraid of breaking that she only came this one ... By the way, if I need more blades, where can I buy Any hardware store sells
Lisinho How to get, I do not know ... I used a file and scraped in the same hand ... lisinho was well, and zuou or anything ...
PS. :: It's normal to go out as much sparkle when you're cutting : Roll: ---
you sure that is the fiber You said what appears to be feeble and fiber is very tough, can handle it and try to break it but it is ****. Yes is normal spark sim.Vc find out more disk in big stores like Leroy Merlin, Peg Do, Leroy onibra etc.Na e'o place that has more variety, has a huge closet of parts, in addition to any cover they offer, if you find it cheaper they cover the offer.
see photo of two blades of photo albums
--- Hmm ... you have an idea of the price of blades: :
--- I'm not sure, but it was at most 5 or 10 dollars each disc media, packaged in a tin 5 disquinhos.Cortei mass polishing paper like hehehe, time will to take something and cut because it's nice to see the same knife to cut bixinha Mantega.
--- Are you referring to fiberglass blades right It also sparks the same
For those who have the micro-grinding of B & D RTX, can you tell me what the best speed to cut the cabinet In the manual they say to use the speed between 5 and 6, but spent my blade in 2 minutes, and another just broke ... I'm now using a speed between 3 and 4, it takes much more to cut, but at least're earning a little more depth as well ... already cut almost the same as before (using the high speed), and the blade's still inteirinho ...
--- I think you did not read the disc fiber does not break easily, should be using the disc errado.olha the photo and see the difference,
--- No need to ask . The answer is: you do the best job.
Bought. It had a rebate, can not remember exactly how much was for sure ... but it was around 160.
Exactly. I had almost paid the Dremel, but unfortunately it was with a friend at the store, and in the end he opened his eyes and took the B & D. I wanted a Dremel anyway, just because it has a name, even though he liked most of RTX. I do not regret, because I tested both. What I really did not like the Dremel was the "footprint" .. you can not hold like a pen with the same ease that the RTX.
--- To do what I did, I spent 23 of the 25 disks "heavy duty". Either I'm retarded, or they spend it quickly. I'm just waiting for a buddy of mine of the School "revealing" photos from your digital camera.
--- And I thought it was just me ... To make the cuts I'm taking a long time ... I think it's taking a poko more because I'm cutting with a lower speed, to avoid breaking the blade .... To using a speed between 4 and 5 on the average. To make some parts with more pronounced curves I'm suffering a poko ... It's kind of tricky ... Oh and one more thing ... To conclude, after cutting, I'm using that sandpaper that came with the RTX ... Do not know if it's correct, because she already got a hole ... huahuahua ... The sandpaper I'm using to make some finishing touches to cut and remove the remains of metal that were ... I think even that is getting nice ... But it will take a caaaaaaaara to get ready ... 8)
Page 4
--- Better to have bought a tico tico hehheheh.Compra a fiber colleague.
--- I finally cut the office ... I think I took practice, because I was using the same Lemina "Heavy Duty" and got cut almost double what the first cut with the blade, and in less time. When I finished I try to post a picture ... I even painted ...! hauhauahua
--- Friends, I hung up super-tou, these micro-grinding, cutting yourself, or only serve to grind If you cut, which the heavier stuff that I can cut it
--- And then I use a knife or sandpaper know, it ends and I have to buy another set of blades only without the dremel ---
Micro-grinders come with a lot of accessories for many different purposes. You can cut, grind, record names, eculpir, several things. To cut, you can use the blades that can cut a quiet office or even a lock ... As the manual says "just do not try to micro grinding for sawing a tree" ... (But you will not do that, right : Wink:) ... Well, when the blades wear out or break, whatever, you can buy more blades ... I think we should sell hardware store maybe ...
--- I spent three to cut the cabinet and the exhaust grills ... I use the micro grinding to 25000 rpm, which incidentally, is the max that my PC can rectify when ..... material is thicker, I prefer to use the Tico-Tico ...
--- Male is male does not use Dremel or any micro grinding, just a male uses this here (click) to make holes in the cabinet
--- [quote = Menassa] Male that is male does not use Dremel or any micro grinding, male uses a logo [url = http://www.ekipe-c.com.br/im ... [/ quote]
I use plastic explosive ... It also has
this more delicate:
http://www.2cooltek.com/case001.html
--- in my case I used 320 grit sandpaper, varnish and metallic automotive paint, was Excellent, then took another coat of varnish to be shiny, and I always automotive wax. ---
Photos like this becoming my full tower.
Photo 1 Photo 2 Photo 3
---
saw as a diagnosis -tor
want to cut a rectangle in my office to put the acrylic. --- Look
my tools, the tico tico is the first left, black.
Tools
Ferramentas2
Share with ICS (Server and client win98 XP) w / BroadJump
--- I
a peer network. Server Win 98, Win XP client.
Always used the wingate to share and always worked perfectly, now I'm trying with the ICS, as I always say it's the best!
Here comes the problem, start the installation the PC server, it asks for a file CD BroadJump, I put the cd and it does not find the specified file (extension. inf) then gave a skip.
Dai follow on .... I put a blank floppy to copy the file and install the client.
When trying to install the file from the floppy in XP, it says it needs the win98 or 95, which way to install the ICS, or another way to share the connection between these two PCs
PS: I'm trying the ICS because I spoke with him I can connect to server to play counter strike on the client, which I could not with wingate
... I hope you can help me ... : Wink:
Hugs. ---
Not quite understand your question, but it would be better to use XP as a server
--- The cable is long, the assembled structure of pro speedy not to change now.
The PC server is a P II 450 MHz, so do not think it's good to install XP on it, and also I can not change place PCs, as I have to be asked in the topic
same guy ... Thanks .... ---
Not need to change the computer, but try the following run the network wizard in xp, create the floppy disk and runs on win98, xp report in during the wizard that he shares the Internet by the network card and in win98 it receives via direct internet wan
--- From
to do so The client (XP), remove the disk and install on the server (win98)
a peer network. Server Win 98, Win XP client.
Always used the wingate to share and always worked perfectly, now I'm trying with the ICS, as I always say it's the best!
Here comes the problem, start the installation the PC server, it asks for a file CD BroadJump, I put the cd and it does not find the specified file (extension. inf) then gave a skip.
Dai follow on .... I put a blank floppy to copy the file and install the client.
When trying to install the file from the floppy in XP, it says it needs the win98 or 95, which way to install the ICS, or another way to share the connection between these two PCs
PS: I'm trying the ICS because I spoke with him I can connect to server to play counter strike on the client, which I could not with wingate
... I hope you can help me ... : Wink:
Hugs. ---
Not quite understand your question, but it would be better to use XP as a server
--- The cable is long, the assembled structure of pro speedy not to change now.
The PC server is a P II 450 MHz, so do not think it's good to install XP on it, and also I can not change place PCs, as I have to be asked in the topic
same guy ... Thanks .... ---
Not need to change the computer, but try the following run the network wizard in xp, create the floppy disk and runs on win98, xp report in during the wizard that he shares the Internet by the network card and in win98 it receives via direct internet wan
--- From
to do so The client (XP), remove the disk and install on the server (win98)
classes of TCP / IP Network
--- Personal
Hello ..
Addressing Network using TCP / IP was divided into five classes being
Class A: 1-126
Class B: 128-191
Class C: 192-223
Now the question that begs not ..... And the Class D and E for serving
Ate more ..... ---
Snif ... : Cry:
Classes D and E are not for commercial use. Class D is for multicast systems. You can only send data to a machine that is configured to q.
Class E is for testing new implementations in networks based on TCP / IP
PS: Where are you Vebea: :: roll:
Connecting the HD ....
--- Oh
guys, when you turn on the HD ribbon cable, is there any priority to connect the HD in some of the tips or whatever.
Type in a cable with three connections to the longest always going on board and Hd is the tip shorter in relation to the connection means, or it does not matter
S and there is a difference please call me convimcente deem an explanation, because so far heard no q convinced me .... Thanks guys
--- Take a look aquihttp :/ / www.X255.info/curso...cabos_flat.asp
guys, when you turn on the HD ribbon cable, is there any priority to connect the HD in some of the tips or whatever.
Type in a cable with three connections to the longest always going on board and Hd is the tip shorter in relation to the connection means, or it does not matter
S and there is a difference please call me convimcente deem an explanation, because so far heard no q convinced me .... Thanks guys
--- Take a look aquihttp :/ / www.X255.info/curso...cabos_flat.asp
Preventing them from entering the single
--- I once read in a magazine (which mine was not, and do not remember which) a way to prevent users from entering single mode. I could not figure out how ... and has a few machines in Facu we had to see it ... does anyone out there know
distro in question is the Slack. ---
Hi lady moon tudjo bao = o)
good come
option I know to this problem would you put a password in lilo in which he inicializaria not the BOOT without the same password is entered, great for sevidores the problem is that she always sought EVERY boot.
to do this you must edit the lilo.conf < BR> and add the following line
PASSWORD = 12345
ok then save lilo.conf and lilo type
bio Jaspion @ # lilo Added
SlackRox
* FreeBSD 4.6
Win2K
this way it will not effect the Boot that is typed in the password ok
Slackware 8.x by not allowed to come in standard single mode without having to type the password it loads
Single mode but at the end of the load
Welcome Jaspion
login :
--- According to my classmate room (according to him I say because I have not seen it, he told me q) gives to enter:
linux single init = / bin / bash rw
only one area lah eh .. PC with slack 7 h, with eight others, others with another version that I do not know what eh .. hehehe ..
good, if not really have to stop this business there, I think that the lilo password may serve me. .. ---
Up ...
--- Okay, there is even an area, you may not be makinas some slack .. and if it is not slack, as I clay the single although I'm pretty sure that all are slack, even though some older versions have
---
see what are the possible entries for the single mode:
linux single linux - s
linux1
linuxone
I only know this!
lah in lilo you copy all the lines for a label! and do as - Bio =] [= azarD - said
adds each end of each part ...
password = algumacoisa
saved after exit
type in lilo bash
Falat and even chmod: # chmod 000
lilo.conf
the naum so that no user can see the contents! Why else it will have access to the password!
I have helped, the explanation tah somewhat vague, but you must desenrrolar the rest! I only know how to do so, has a way to make lilo more secure anymore I do not remember how to do!
How to cut acrylic sheets
--- Well, I've been concerned about these very matters on case mod, but I still have one question: how do I do to cut acrylic sheets used as windows What tool can I use for this
And one more question: what is the best paint to paint the cabinet I've seen many suggestions here, but do not want to risk it. And then, should be two types of paint: to paint a metal parts and another to paint the plastic parts of the computer ... Suggestions : :
--- I use to cut jigsaw with a guide in order to make the cut straight, the paint you can use automotive paint plastic parts that you must first pass a sealer, then a primer, sanding and then paint using spray paint and use an airbrush for detail, the procedure for plastic parts is the same to paint the bumper of a car.
--- I have wanted to know how to hold the acrylic plate on the lid of the case.
Won! ---
Uses rubber profile in the format H or S. .. H is the best, is a more beautiful finish ... looks
aki how to ...
Http://www6.tomshardware.com/howto/02q3/020724/pc_case-09.html
hug!
--- Yesterday I painted my only sanded with sandpaper all parts 320 and spray painted with a matte black, I'm pretty cool.
Know q is nothing professional, but it was good and cheap . hehehe
Now the question, paint with spray paint has a problem
--- Did not you have some pictures of it for me (or us) see (mos)
I like the idea of painting the micro.
--- If you do not have a jigsaw, can lead to a skilled plumber who will do it with a blowtorch, which by the way, is much better than fret because of the finish
---
acrylic cutting torch 8O 8O 8O
--- q I like to paint the floppy drive and cut the acrylic cover and I shot a few otos and put here.
Unfortunately I can only paint the Label at the end of December when q is the warranty ends, al leave blank for now.
--- I cut with my soldering iron ... then took a lixadinha edges, very lightly, 'cause after all is inside and not seen. And the transparent acrylic used a clipboard for papers that I bought for U.S. $ 4.00 in stationery. ---
To do hurricane fan (yeah, right ... hurricane bore hole ... hehe) I bought a saw and cut glass of 79mm acrylic q or butter ... heheheh
cutie ...
gotta be very careful when cutting the acrylic to fret, because if the saw gives a quick getaway, goodbye new window! hehehe ... I went with drill drill the acrylic to guide the saw cup and clenched it all ... almost beeem then went in the morning ... heheh
Hug!
Attachments with names changed
---
Lately I've been getting some attachments, but are not all in all formats, are coming up with the truncated name. For example:
= iso-8859-1QPavo.jpg = or = iso-8859-1Qboca_abertaXXX.pps = h the pattern is always the same.
Anyone know what is causing this
Ja spent the antivirus and not get anything.
Use Win98SE, incredimail, Nav2002 and zonealarm pro.
The configurations of the zonealarm antivirus are disabled.
--- This should be differences in coding of message types European (Western) European (windows) etc..
Experiment by changing the encoding and sending e-mail to another account their own.
[] 's ---
Junim Thanks!
The Incredimail has the standard Western European (ISO) and Western European (Windows). The ISO standard comes as default and I had no idea that: oops:
tkz Problem solved! : D
Lately I've been getting some attachments, but are not all in all formats, are coming up with the truncated name. For example:
= iso-8859-1QPavo.jpg = or = iso-8859-1Qboca_abertaXXX.pps = h the pattern is always the same.
Anyone know what is causing this
Ja spent the antivirus and not get anything.
Use Win98SE, incredimail, Nav2002 and zonealarm pro.
The configurations of the zonealarm antivirus are disabled.
--- This should be differences in coding of message types European (Western) European (windows) etc..
Experiment by changing the encoding and sending e-mail to another account their own.
[] 's ---
Junim Thanks!
The Incredimail has the standard Western European (ISO) and Western European (Windows). The ISO standard comes as default and I had no idea that: oops:
tkz Problem solved! : D
CPU cooling-Help me
--- Guys, is there any other way of cooling the CPU, without being conventional coolers
Pq is seen a "cooler" half stoned, with water pump, hose to pass the water cooler's copper base, etc. ..
It really exists
if any, does anyone know where to buy
--- There was a guy selling watercooler here. He and quieter but not unless you want to make an oc ill in your comp, not worth it. --- In
PC 34 also has a radiator to proc. zen of this is also quite different and expensive. ---
Zen has a poor performance, is expensive and is a destroyer of processors, if you do not use a shim your processor goes into space.
Watercooler guy ta this link http:/ / www.SITEX255.net/viewtopic.php t=12743&highlight=watercooler
How to update the BIOS of a pc chips m766 Mobo
--- I have a pc chips m766 Mobo and wanted to upgrade the BIOS but do not know how.
I wish someone could explain to me how to upgrade.
I went to the site of PC chips and did not find any files to update, where can I find this file exists or not upgrading to this board
Thanks, Marcio.
Disk boot
--- How do I create a boot disk for win95 with CD and programs like fdisk --- From
win95 does not support CD.
Uses the win98 that runs without problems to install win95.
[] 'S
- -
Create a boot disk normally.
Edit CONFIG.SYS to call a controller (or other type cdrom.sys).
tb Edit autoexec.bat and add the command line mscdex ( Give a mscdex / for options).
Restart the computer and go for it.
---
Junin and friends
Give yes, picks up the file to the win95B the link below, but before you format a floppy disk, then just click over to the executable you downloaded it will automatically mount a cd boot with support for
luck --- To support the CD, and much easier you use the Win 98 disk.
--- Yes I agree, but in my case I do not know why charge d'agua, when I used the boot disk from Win 98 and I did not accept the CDROM when I typed install.
< BR> Do not ask me, but gave a big headache for installation at one o'clock PT 166MMX. if I tell that I had to vc'so defazer a real juggling act to install the system, you would think it's that I'm crazy.
But anyway these days to move back in the blessed and decide to get the Win 98SE as was very slow and I installed Win 95B, but not as abixeira insisted aceirtar the command install directly from CD, and I even changing the Driver CDROM I tried using the Xcopy ME Boot Disk to copy the entire contents of the CD and try to diretamento install the HD, but it gave error not compatible version of Of something to that effect.
Then I found a boot disk and copied Win95B all your content from CD to HD, is not that miserable accepted the command install directly from CD, almost caught in this unfortunate taquei Pararede, let me lose days trying to install the system.
are something that has no explanation. Although
--- q to install the win in any version is not necessary to copy the entire cd. Just copy the files at the root q. The executable (setup.exe), the cabs and a few others ... It's all in the root! ---
And tb and the best boot disk is q.
What is the problem with my HD 2Gb
--- A friend of mine gave me a HD Quantum Fireball 2GB and when I do a ScanDisc it crashes every time in the same place and have to reset the computer.
I copied a movie in HD and put to run and the film also caught.
What is the problem of HD has
how to fix How
Thanks, Marcio. --- There
Marcio Estor here with an HD of 600 Mbytes and a few with the same defect scandisk always enters and locks in 6% after it appears a blue screen saying a fatal error, there was no way entering the win.
I did the following, I went into FDISK and delete the only partition that was created after I activated a new partition and finally formatted and ready to ha.
Well now you just need to install the win, the still could not do for lack of a CDROM that has pc, tbém not have the win98 diskette.
Speaking of diskette you will need a floppy boot win 98
if you have not to do using the FDISK and FORMAT, ok. ---
Marcio was forgetting, I put a thread asking for help tbém staff told me, and you can read to help you tbém,: arrow:
http://www.SITEX255.net / viewtopic.php t = 11419 ---
Wheel scandisk from DOS with parameters "/ autofix / surface." This instructs the scandisk not to question about the correction of errors and automatically enter the test surface.
In a case like yours would not be surprising to receive an error like: "stack overflow, change the setting in CONFIG.SYS STACKS and try again." If this happens
Make a backup of what is possible and replace the HD.
I hope I have helped. ---
Already formatted the hard drive several times to try to resolve the problem even used a program called FILL ZERO to zero the HD and when it reaches the end of the process a message that the HD is defective. Does the HD was already, can not recover it
Now when I enter the windows and put on the properties of the system appears my HD 10Gb and my friend gave me 2Gb installed, but when I go in windows explorer HD 2Gb does not appear.
I'll try to use such a disk maneger to see if I fix the problem.
Tutorials on ATM Networks and Fiber-optic
---
Hello everybody .... I'm looking for information on techniques and fiber-optic ATM Networks ... I found some interesting pages on yahoo, but still leaves much to be desired ..... I wonder if someone can show me a cool website, or has some stuff about ... Ate
staff .... --- Actually ...
Find all in one place is difficult. You have to pick up the pieces, join and assemble a tutorial ... Try these
--- Is there a website where you can find all these handouts and other related networking and telecommunications.
: Idea: This www.projetoderedes.kit.net
is the site of a degree in computer networks Volta Redonda RJ I do.
addition to handouts, also has tips, links, drivers, news and more. A hug
--- Wow! I burned my tongue ... hehe! Very good site that is already in my favorites, thanks!
Hello everybody .... I'm looking for information on techniques and fiber-optic ATM Networks ... I found some interesting pages on yahoo, but still leaves much to be desired ..... I wonder if someone can show me a cool website, or has some stuff about ... Ate
staff .... --- Actually ...
Find all in one place is difficult. You have to pick up the pieces, join and assemble a tutorial ... Try these
--- Is there a website where you can find all these handouts and other related networking and telecommunications.
: Idea: This www.projetoderedes.kit.net
is the site of a degree in computer networks Volta Redonda RJ I do.
addition to handouts, also has tips, links, drivers, news and more. A hug
--- Wow! I burned my tongue ... hehe! Very good site that is already in my favorites, thanks!
LX-300 printer, Windows NT4.0
--- C
I wonder someone can help me giving this a problem with a printer LX-300, it is not printing, has a message that does not find the file I am using Windows NT4.0, appears an error 1058
some can help me thank
--- If I mistake not the NT does not have native drivers for LX-300, you must use another model printer (the Epson), the problem is I forgot the model q! --- And
ae .... Try doing the following ... install a printer manufacturer and model is called Generic Text Only ... is to work.
spoke
--- Use the generic:
LX-400 show work got
Hugs
Internet Sharing with Linux X ******** (squid)
---
Squid installed but not working!
If you guys have a version confialvel pass me the link, and precise configuration of tb.
A Mandrake 8.1 machine that that is installed squid
Machine 2 Windows 98se -> this is that I will use the share of the squid, put the port 3128 in the proxy configuration.
I configured according to tips from Morimoto (which is kind of partial to beginners like me for example) but inhenheca pitibiriba of "no work" may be the rpm that is grubby.
--- Does anyone know!
Va --- the official website of the Squid and download it in tar.gz format
---
already installed again, give me some tips, configuration and testing to see if it works cool .
If you must make settings in linux I pass e.
Valew
--- There in my bookmark has a section with some links of the squid gives a sought there. www.mutlley.hpg.com.br
Squid installed but not working!
If you guys have a version confialvel pass me the link, and precise configuration of tb.
A Mandrake 8.1 machine that that is installed squid
Machine 2 Windows 98se -> this is that I will use the share of the squid, put the port 3128 in the proxy configuration.
I configured according to tips from Morimoto (which is kind of partial to beginners like me for example) but inhenheca pitibiriba of "no work" may be the rpm that is grubby.
--- Does anyone know!
Va --- the official website of the Squid and download it in tar.gz format
---
already installed again, give me some tips, configuration and testing to see if it works cool .
If you must make settings in linux I pass e.
Valew
--- There in my bookmark has a section with some links of the squid gives a sought there. www.mutlley.hpg.com.br
Destination Host Unreachable - Notebook PCMCIA RH7.3
--- When
ping any ip:
Destination Host Unreachable - Notebook PCMCIA RH7.3
What is it ---
Of a look at your default gateway route-r
ping any ip:
Destination Host Unreachable - Notebook PCMCIA RH7.3
What is it ---
Of a look at your default gateway route-r
how to know what kind of eh my adsl
--- Hello
staff would like to know how do you know what type of ADSL (fixed or naum ip).
Have to change Or they naum maai do that
--- Do you need to authenticate to use the net If the answer is positive, it is dynamic IP. If not, is fixed.
If fixed IP, stay in your corner. If it is dynamic, there is no change ...
Wow
turned a nice exercise in logic programming ... hehe!
--- C
change does have will have to sign an ADSL service business much more expensive than the home is the advantage you have when your IPFixo
--- Bio
Speak!
Yeah. But I've been reading a topic q intrigued me, take a peek ... http://www.SITEX255.net/viewtopic.php t=14410
--- answer me how you connect, and how much you pay and I'll tell you what it is ---
hello, your kind of dynamic IP ADSL can be .. (Q u p uses software to connect to the net, eg Broadjump and your IP is always changing), q is fixed and you have a unique IP and does not need to authenticate the program, hugs
Vinimc3001 ---
al
led my connection eh no authentication and only put the numbers in each ch of dns. The modem is plugged into the hub
But I think my ip naum qo h pq fixed naum every time I turn on the pc again it changes the external ip. Tb naum can not even create a game server or ftp (but guess it can be locked doors ( ))
When I create a game server for example, but usually it creates naum know what ip to send others come as no it works
My adsl ip dinamio neh eh
earned
--- luiz, then you should be PPPoE NAT should have done, there need not c authenticate the program p, but their IP mud aa increasingly connects q PC.abraços
Vinimc3001
--- luiz, then you should be PPPoE NAT should have done, there need not c authenticate the program p, but their IP mud aa increasingly connects q PC.abraços
Vinimc3001
---
must be earned entaum
---
available, Luiz, I'm new aki this SITE, and I want to make new friends with a nice eq guys can discuss various issues in a constructive and healthy, no doubt, post-q I can help you, hugs
Vinimc3001
--- which brand of your modem, it can be configured depending on and opened the doors.
--- Hello, look I'm using dial-up lately .... qndo but lived in St. Paul used Speedy was my SpeedStream 5600 modem and never had problems with it, and Speedy do you use hugs
Vinimc3001
--- vcs
doing so confusion ... ip (ip hot valid on the Internet) provider that delegates to the MODEM can be fixed or dynamic. If you MODEM forwards this IP to your machine (and you need authentication for internet access), he is working as BRIDGE, otherwise it's a ROUTER (which does not require authentication manual) ... on IP, is as follows: the sum is the most expensive, cuz lets you record this in ip FAPESP, and it has a domain. The dynamic was at work as dial-up, changes constantly, and has ports FTP, HTML and more blocked. If your modem is in ROUTER, the second ip, what MODEM delegates to the internal machines (in this case, yours, and perhaps others that are connected via a hub on the modem) a ip is called "IP COLD", cause he just goes for the internal network. It can be fixed or dynamic, depending on the configuration MODEM. If it is the internal DHCP server enabled, each machine that is connected to it will get an ip, dynamic, usually 192.168.xx. band. Otherwise, if it is with DHCP disabled, it will only have to use an ip, the ip will be used by internal machine (your PC). But it all depends on the model of your modem supports routing and dhcp server.
Report Inappropriate
Hug
--- q I messed up one, you just gave a more detailed explanation. ---
Thought ... is that anyone reading this forum could be confused in the history of ip ... Good, I hope you naum!
hug!
staff would like to know how do you know what type of ADSL (fixed or naum ip).
Have to change Or they naum maai do that
--- Do you need to authenticate to use the net If the answer is positive, it is dynamic IP. If not, is fixed.
If fixed IP, stay in your corner. If it is dynamic, there is no change ...
Wow
turned a nice exercise in logic programming ... hehe!
--- C
change does have will have to sign an ADSL service business much more expensive than the home is the advantage you have when your IPFixo
--- Bio
Speak!
Yeah. But I've been reading a topic q intrigued me, take a peek ... http://www.SITEX255.net/viewtopic.php t=14410
--- answer me how you connect, and how much you pay and I'll tell you what it is ---
hello, your kind of dynamic IP ADSL can be .. (Q u p uses software to connect to the net, eg Broadjump and your IP is always changing), q is fixed and you have a unique IP and does not need to authenticate the program, hugs
Vinimc3001 ---
al
led my connection eh no authentication and only put the numbers in each ch of dns. The modem is plugged into the hub
But I think my ip naum qo h pq fixed naum every time I turn on the pc again it changes the external ip. Tb naum can not even create a game server or ftp (but guess it can be locked doors ( ))
When I create a game server for example, but usually it creates naum know what ip to send others come as no it works
My adsl ip dinamio neh eh
earned
--- luiz, then you should be PPPoE NAT should have done, there need not c authenticate the program p, but their IP mud aa increasingly connects q PC.abraços
Vinimc3001
--- luiz, then you should be PPPoE NAT should have done, there need not c authenticate the program p, but their IP mud aa increasingly connects q PC.abraços
Vinimc3001
---
must be earned entaum
---
available, Luiz, I'm new aki this SITE, and I want to make new friends with a nice eq guys can discuss various issues in a constructive and healthy, no doubt, post-q I can help you, hugs
Vinimc3001
--- which brand of your modem, it can be configured depending on and opened the doors.
--- Hello, look I'm using dial-up lately .... qndo but lived in St. Paul used Speedy was my SpeedStream 5600 modem and never had problems with it, and Speedy do you use hugs
Vinimc3001
--- vcs
doing so confusion ... ip (ip hot valid on the Internet) provider that delegates to the MODEM can be fixed or dynamic. If you MODEM forwards this IP to your machine (and you need authentication for internet access), he is working as BRIDGE, otherwise it's a ROUTER (which does not require authentication manual) ... on IP, is as follows: the sum is the most expensive, cuz lets you record this in ip FAPESP, and it has a domain. The dynamic was at work as dial-up, changes constantly, and has ports FTP, HTML and more blocked. If your modem is in ROUTER, the second ip, what MODEM delegates to the internal machines (in this case, yours, and perhaps others that are connected via a hub on the modem) a ip is called "IP COLD", cause he just goes for the internal network. It can be fixed or dynamic, depending on the configuration MODEM. If it is the internal DHCP server enabled, each machine that is connected to it will get an ip, dynamic, usually 192.168.xx. band. Otherwise, if it is with DHCP disabled, it will only have to use an ip, the ip will be used by internal machine (your PC). But it all depends on the model of your modem supports routing and dhcp server.
Report Inappropriate
Hug
--- q I messed up one, you just gave a more detailed explanation. ---
Thought ... is that anyone reading this forum could be confused in the history of ip ... Good, I hope you naum!
hug!
Doubt on ICQ
--- I'm new to using the ICQ software. When I find someone, either name, nickname, or city have the option of the ICQ I will only list the users .. But even with the option checked he lists all .. What do I do
Thank you. ---
Kro colleague Wolfstein,
I'm pretty sure the moderators will move your message to the area of software and of course, you'll get a better return of your question there.
Cheers, Marcelo Cruz
---
Amaralcruz, hit
About the doubt, it is strange that it lists the offlines too ... you're using a recent version ---
Should be bug ... for a change ... : --- And
bug in the ICQ server, even if you select him find only users online, he is finding todos.Eu not know what 's going on with the ICQ server, has it been a while that this is happening.
--- For a long time indeed! --- Strange ...
Some time ago it worked properly, I would even disagree with all of you, but to make sure I did the test now. The result was the same you guys said.
Use version 2001b, this never gave me a headache.
Pau on the 2nd stage of installing MDK 8.2
Hello Forum ---
8)
Today I was trying to install on a PC MDK8.2-chip chipset VX-PRO II (I forget the number, but no matter) with a Pentium 166 @ 190 MHz RAM and 32. The machine is old and rotten, like a tutorial that Morimoto wrote a while ago, which I relied to do this.
Well, the first attempt was to install via NFS (which needed 32 MB RAM ) ... but he fought in the 2nd stage in the installation with the message which appeared to be ram problem (although he has the requirement for Minio instalalção network). So I tried installing the CD-ROM, but gave the same error.
After that I tried to change the plava video, but the same error .. will this mobo is not approved for use Linux 8O
The mesagem is:
Code: in second stage install install exited abnormally :-( umonting filesystems ... / proc / tmp / image you may safely reboot your system's log In, I realize that before he tried to stop charging DrakX v1.684 ... so the bid board
video ... Well, what can be ( now) the problem : roll:
Valew [/ code] ---
two alternatives, go to text mode and disable the processor over and return to normal frequency. < BR> --- Last
attempts:
- underclocked @ 166 120
- Only 16 RAM, switched.
And Nothing .. that thing! In some PCs I install as facinho: cry: Still
thanks!
8)
Today I was trying to install on a PC MDK8.2-chip chipset VX-PRO II (I forget the number, but no matter) with a Pentium 166 @ 190 MHz RAM and 32. The machine is old and rotten, like a tutorial that Morimoto wrote a while ago, which I relied to do this.
Well, the first attempt was to install via NFS (which needed 32 MB RAM ) ... but he fought in the 2nd stage in the installation with the message which appeared to be ram problem (although he has the requirement for Minio instalalção network). So I tried installing the CD-ROM, but gave the same error.
After that I tried to change the plava video, but the same error .. will this mobo is not approved for use Linux 8O
The mesagem is:
Code: in second stage install install exited abnormally :-( umonting filesystems ... / proc / tmp / image you may safely reboot your system's log In, I realize that before he tried to stop charging DrakX v1.684 ... so the bid board
video ... Well, what can be ( now) the problem : roll:
Valew [/ code] ---
two alternatives, go to text mode and disable the processor over and return to normal frequency. < BR> --- Last
attempts:
- underclocked @ 166 120
- Only 16 RAM, switched.
And Nothing .. that thing! In some PCs I install as facinho: cry: Still
thanks!
Scheme S-VHS> S-VHS, S-VHS> Rca - Help!
--- I need a few cables here and decided prepares them. However I found the layout of the network pinning. Do I need two cables
1 - S-VHS> S-VHS, even made one. I called at the entrance of the video card and TV. In both the picture came out perfect but the sound does not appear. I think I did something wrong. Can someone pass me the schematic
2 - S-VHS> RCA, the scheme also need pinouts of this cable.
I have a Pinnacle PCTV and am trying to connect a cable to make some angry here to catch my old VHS. Thanks
ae.
Thor
--- It is not for nothing .. but the sound has nothing to do with the video or if the image is showing up ta all right! : Lol:
I had such a scheme here .. but I lost. If I find post here!
Falow! ---
Loose, blz! So glad to hear that everything is ok out here!
I'll have to make another sound ... or maybe make the S-VHS> RCA, lose some image quality and get the sound, so no way. If I put S-VHS> RCA sound will come out ---
.... So I guess you must be wanting to watch DVDs or play using your TV instead of monitor right If so, you is confusing things a bit. The TV output video card will only provide video regardless of the type of cable used. To listen to the sound you need to connect the audio output of your sound card's audio input on your TV, or else use the speakers of the same PC.
If it was not clear, look for me in icq .
Falow! : Wink: ---
http://www.overclockers.com/tips183/
--- The sound does not come out if you do not turn the tv on line out of plate. You'll need a cable with a connector and 2 RCA stereo P2 at the other end ...
To convert Svideo to composite, just add the two signal wires and solder the RCA ... works in 99% of cases ...
--- The cable is to play the image of video equipment to the video input of TV and capture card Pinnacle PCTV.
Oks ... I will touch this Saturday and see what happens.
Thanks ae.
Thor
Lightweight firewall with antivirus ...!
--- Anyone know any firewall that has light and uncomplicated tb with antivirus ... My machine is slow and would like to use the two together instead of installing two programs. Use the win98-SE. : Idea: Thanks
... --- Hello you
Norton Internet Security includes both programs you want, is efficient, convenient and very safe.
Hugs
---
Although q a good antivirus avoids the use of firewall, at least for home users, since they can detect trojans q ... --- I also think
qo Norton Internet Security and an excellent choice for you! It also has
--- eSafe Desktop, which provides anti-virus and firewall. Although he has used, and to find their small library of virus compared to Norton, for example. --- Great
Led
Nowadays, I think essential to use a good firewall, otherwise you would be very exposed to possible attacks, especially if you use P2P, and if the connection is broadband .
I do not open these safety concerns and so the firewall is started along with the OS.
Hugs
--- That's true, huh ! With these
of Kazaa Life is much greater danger. And then adsl ... But I never had problems with it ... The funny thing is
colleagues have q q q say use firewall and suffer an attack in 5 minutes, I find it overkill. Q had a friend of mine was using the computer, and suddenly, the mouse began her walk alone ... hehe! Cause it does not happen to me I have a firewall antivirus installed, but rarely do I enable them ... ---
Nav2002 and I use ZoneAlarm Pro, which I think better than symantec firewall.
My connection is connected almost 24 hours day and not have all these attacks really an exaggeration. ---
Tb I guess you do not need a firewall if you have an updated anti-virus ... these friends said q q have a intrusion attempt in 5 min must be wrong ... q q must have happened is some moron has a scan to check people infected with a trojan trying to invade ...
am not the owner of the truth, it's just my opinion .... if I said something stupid, someone correct me
spoke
--- Every five minutes I do not know, but look at my case:
ZoneAlarm Logging Client v3.1.291
Windows XP-5.1.2600-
-SP type, date, time, source, destination, transport
EP, 08/10/2002, 17:20:20 -3:00 GMT, Microsoft ( R) HTML Application host 127.0.0.1:1028, N / A
ACCESS, 08.10.2002, 17:20:28 GMT -3:00, N / A N / A
ACCESS 08/10/2002, 17:20:28 -3:00 GMT, Microsoft (R) HTML Application host was temporarily blocked from connecting to the Internet (127.0.0.1: Port 1028)., N / A, N / A < BR> FWIN, 10/08/2002, 17:27:58 -3:00 GMT, 200.226.133.127:80,200.151.163.75:24601, TCP (flags: S) FWIN
, 08/10/2002, 17: 29:02 -3:00 GMT, 200.226.133.127:80,200.151.163.75:24601, TCP (flags: S) FWIN
, 10/08/2002, 17:32:54 -3:00 GMT 200.151.95.254 : 4665,200.151.163.75:80, TCP (flags: S) FWIN
, 10/08/2002, 17:33:16 -3:00 GMT, 200.151.163.62:1778,200.151.163.75:139, TCP (flags: S) FWIN
, 08/10/2002, 17:33:20 -3:00 GMT, 200.222.0.35:53,200.151.163.75:1132, UDP FWIN
, 08/10/2002, 17 : 33:22 GMT -3:00, 200.151.163.62:1778,200.151.163.75:139, TCP (flags: S) FWIN
, 08/10/2002, 17:33:24 -3:00 GMT, 200.151.163.62:1778,200.151.163.75:139, TCP (flags: S) FWIN
, 10/08/2002, 17:44:14 -3:00 GMT, 172.187.3.95:1828,200.151.163.75: 1214, TCP (flags: S) FWIN
, 10/08/2002, 17:44:20 -3:00 GMT, 172.187.3.95:1828,200.151.163.75:1214, TCP (flags: S)
FWIN, 10/08/2002, 17:52:22 -3:00 GMT, 200.151.163.73:1530,200.151.163.75:139, TCP (flags: S) FWIN
, 08/10/2002, 17 : 52:24 GMT -3:00, 206.16.0.236:80,200.151.163.75:12711, TCP (flags: S) FWIN
, 08/10/2002, 17:52:26 -3:00 GMT, 200,151. 163.73:1530,200.151.163.75:139, TCP (flags: S) PE
, 10/08/2002, 18:24:38 -3:00 GMT, ZoneAlarm, 200.222.0.34:53, N / A < BR> FWIN, 10/08/2002, 18:42:04 -3:00 GMT, 200.151.152.28:3531,200.151.163.75:80, TCP (flags: S) FWIN
, 08.10.2002, 18:45:44 GMT -3:00, 200.151.152.28:3007,200.151.163.75:80, TCP (flags: S) FWIN
, 08/10/2002, 19:02:26 -3:00 GMT , 200.254.67.65:3489,200.151.163.75:2583, TCP (flags: S) FWIN
, 10/08/2002, 19:02:28 -3:00 GMT, 200.254.67.65:3489,200.151.163.75 : 2583, TCP (flags: S) FWIN
, 08/10/2002, 19:30:38 -3:00 GMT, 200.222.0.35:53,200.151.166.184:1063, UDP FWIN
, 2002/08 / 10,19:30:40 -3:00 GMT 200.222.0.35:53,200.151.166.184:1065, UDP
FWIN, 08.10.2002, 19:30:54 GMT -3:00, 200 226 133 127 : 80,200.151.166.184:14637, TCP (flags: S) FWIN
, 10/08/2002, 19:32:00 -3:00 GMT, 200.222.0.35:53,200.151.166.184:1088, UDP FWIN
, 08/10/2002, 19:32:02 -3:00 GMT, 200.226.133.90:80,200.151.166.184:20944, TCP (flags: S) FWIN
, 10/08/2002, 19:32:06 -3:00 GMT, 200.226.133.127:80,200.151.166.184:12847, TCP (flags: S) FWIN
, 10/08/2002, 19:33:12 -3:00 GMT, 200.226.133.90:80,200.151. 166.184:20944, TCP (flags: S) FWIN
, 10/08/2002, 19:33:14 -3:00 GMT, 200.226.133.127:80,200.151.166.184:14637, TCP (flags: S)
FWIN, 10/08/2002, 19:33:44 -3:00 GMT, 200.226.133.127:80,200.151.166.184:12847, TCP (flags: S) FWIN
, 08.10.2002, 19:50 : 06 -3:00 GMT, 66.8.163.19:1025,200.151.166.184:139, TCP (flags: S) FWIN
, 08/10/2002, 19:50:08 -3:00 GMT, 66.8. 163.19:1025,200.151.166.184:139, TCP (flags: S) PE
, 10/08/2002, 20:28:20 -3:00 GMT, ZoneAlarm, 200.222.0.34:53, N / A < BR> EP, 10/08/2002, 20:28:24 -3:00 GMT, ZoneAlarm, 200.222.0.34:53, N / A FWIN
, 08/10/2002, -3 20:28:24 : 00 GMT, 200.222.0.35:53,200.151.166.184:1339, UDP
EP, 10/08/2002, 20:28:24 -3:00 GMT, ZoneAlarm, 200.222.0.34:53, N / A
PE, 10/08/2002, 20:29:42 -3:00 GMT, ZoneAlarm, 200.222.0.34:53, N / A
EP, 08/10/2002, 20:29:50 -3: 00 GMT ZoneAlarm, 200.222.0.34:53, N / A
FWOUT, 08.10.2002, -3:00 20:31:28 GMT 200.151.166.184:1353,200.222.0.34:53, UDP < BR> FWOUT, 10/08/2002, 20:31:28 -3:00 GMT, 200.151.166.184:1353,200.222.0.35:53, UDP FWIN
, 10/08/2002, 20:56:54 -3:00 GMT, 210.3.205.65:22,200.151.166.184:22, TCP (flags: S) FWIN
, 08/10/2002, 20:58:42 -3:00 GMT, 200.222.0.35:53,200.151. 166.184:1411, UDP
FWIN, 08.10.2002, -3:00 20:58:46 GMT 200.222.0.34:53,200.151.166.184:1411, UDP
FWIN, 10.08.2002, 20 : 58:46 GMT -3:00, 209.73.225.60:80,200.151.166.184:29240, TCP (flags: S) FWIN
, 08/10/2002, 21:06:38 -3:00 GMT, 209.10. 17.214:80,200.151.166.184:9278, TCP (flags: S) FWIN
, 08/10/2002, 21:06:42 -3:00 GMT, 209.73.225.60:80,200.151.166.184:24219, TCP (flags: S) FWIN
, 10/08/2002, 21:06:44 -3:00 GMT, 200.222.0.35:53,200.151.166.184:1477, UDP FWIN
, 10.08.2002, 21:06: 54 -3:00 GMT, 209.10.17.214:80,200.151.166.184:9278, TCP (flags: S) FWIN
, 10/08/2002, 21:07:32 -3:00 GMT, 209.73.225.60:80,200.151 .166.184:24219, TCP (flags: S) FWIN
, 10/08/2002, 21:09:06 -3:00 GMT, 200.151.222.238:3249,200.151.166.184:6667, TCP (flags: S ) FWIN
, 08/10/2002, 21:09:40 -3:00 GMT, 200.222.0.34:53,200.151.166.184:1515, UDP FWIN
, 08/10/2002, 21:09:44 -3:00 GMT, 209.10.17.214:80,200.151.166.184:9278, TCP (flags: S)
--- If the internet security q h a firewall comes with NAV. There are two programs. If you want something free, lightweight, avg and zone alarm.
--- This is the kind of thing q does not enter my head! Try to understand me, I get to spend more than five hours direct connected, let antivirus and firewall disabled and I see no abnormality in my computer. Once a week I update my antivirus and do a "check up" complete in him, nothing appears, no virus or trojan ... Use icq kazaa and ... My SO is the 2000 Pro Could someone explain to me Cause never tried to invade my computer Everyone speaks q has suffered invasion attempt, only I do not have q story to tell ... : Cry:
these days I just entered a site and got a virus done in vbscript, can you I took a quick way ... --- These
intrusion attempts that firewall who has always reports are pings from clients of Trojans, or any portscan. The Lammer has connected all the time and tracking an IP range in search of a trojan server. And when one reaches these ping a computer with a firewall, the information that has blocked an intrusion attempt. But actually you would only be invaded if the server was installed.
Also, depending on the level of firewall protection, it alerts you when a server from a site exchanges information with your machine.
But the firewall is also impotante to monitor programs trying to access the internet from your machine. A good example is the spyware. You download a program that does not need to connect to the Internet (as an image viewer, for example), and suddenly the firewall reports that a program that accompanied the said program tries to access the internet, and the worst is that the program runs on spyware background, you can not imagine that he is sending your personal information.
Another case dial are some programs that install themselves on your PC, and access the Internet without your permission. I've been a victim of these dial, self-installed using ActiveX controls, and Zone Alarm was the one who warned me of the connection attempt.
Another case where the firewall is essential for anyone who uses computers is network, and that file and printer sharing is enabled. And so it is easier to invasion. --- Good
Weyne!
My concern here is limited. I am concerned only with trojans and other programinhas q try to use the net via my PC. So do not let your firewall turned on all the time, it annoys me, even after configured. Once in qdo use it just to see how things are going ... --- PC-
Cillin2002! comes with a firewall tb! ---
Bitdefender 9 and F-Secure 2006
Gravedigger Only search ultilizei ... : Lol: ---
Ruyz , I recommend you install a good antivirus and lightweight, such as Symantec Antivirus Corporate Edition. He is very light, it is somewhere around 15-30 MB when installed and consumes very little memory, no tm frescurinhas those that have norton ... them and the engine is the same.
And as a firewall or recommend Zone Alarm or Sygate Personal Firewall ... I use the latter and I think perfect.
Asus provides A7N-266
---
PessoALL Olah,
work in a computer lab where I was asked to do a survey now for a setting and micro repctivos prices to upgrade the laboratory. Having
in view of the programs used here with a newspaper and computer, I did this configuration: Asus A7V-E sound, Duron900, Pl.Video TNT2 M64 32MB AGP, 128 PC133, 52X CDROM, Pl.Rede, Monitor 15 " ATX case, mouse, keyboard, cooler, etc.. That is, a full micro costing R $ 1,680.00
Then I thought well, and saw that A7VE, the TNT2 card and 128MB PC133 memory could be replaced by an Asus A7N- 266 and a 128MB DDR memory stick. This was another micro R $ 1,607.00.
I thought the second option would be the best cost / benefit. But I never saw a working Asus A7N-266 and therefore would like the opnion of you. You guys have noticed some incompatibility or had some difficulty with it This configuration runs Windows 95
Cheers, Andrew
.
--- Look
friend never had problems with A7N the asus as I never had problems with asus motherboard but if you want to improve their configuration at the same cost benefit, have you thought about changing this tb by a 900MHz Duron of the 1ghz since there is little real difference
Or for a Duron 1.2 ghz since it costs around 190.00 dollars
---
Olah cabinets, I
this setting based on announcements of some stores in a newspaper of 07/08/02, so naum saw the announcement of a Duron 1Ghz and added that setting the naum.
But guess a Duron 900 does the job because people will use it to access the Internet, edit text and will rarely use heavy programs or q work with 3D.
---
A7N The only problem is that it can not run a video card with less than a GF2 (which nobody does it). Another question ---
. This motherboard comes with On-board or not
In the ad was:
"Asus A7N-266 Sound and Video - R $ 369.00 DDR"
That is not say anything on-board network although they say it has q network.
--- This network has on-board A7N266 VM A.Essa not A7N266-C.
- - Hello
I set this to a friend and gave a sound problem because the network card, and not updating the BIOS and changing the network card slot, it worked.
I had to change the model of network card, and it seem like there is some conflict in realamente pci, according to the asus site.
The one I used was the A7N266-C, no network .. .
Thankfully, this motherboard is Nforce cheaper, anything from 90 to 100 dollars.
Giga
PessoALL Olah,
work in a computer lab where I was asked to do a survey now for a setting and micro repctivos prices to upgrade the laboratory. Having
in view of the programs used here with a newspaper and computer, I did this configuration: Asus A7V-E sound, Duron900, Pl.Video TNT2 M64 32MB AGP, 128 PC133, 52X CDROM, Pl.Rede, Monitor 15 " ATX case, mouse, keyboard, cooler, etc.. That is, a full micro costing R $ 1,680.00
Then I thought well, and saw that A7VE, the TNT2 card and 128MB PC133 memory could be replaced by an Asus A7N- 266 and a 128MB DDR memory stick. This was another micro R $ 1,607.00.
I thought the second option would be the best cost / benefit. But I never saw a working Asus A7N-266 and therefore would like the opnion of you. You guys have noticed some incompatibility or had some difficulty with it This configuration runs Windows 95
Cheers, Andrew
.
--- Look
friend never had problems with A7N the asus as I never had problems with asus motherboard but if you want to improve their configuration at the same cost benefit, have you thought about changing this tb by a 900MHz Duron of the 1ghz since there is little real difference
Or for a Duron 1.2 ghz since it costs around 190.00 dollars
---
Olah cabinets, I
this setting based on announcements of some stores in a newspaper of 07/08/02, so naum saw the announcement of a Duron 1Ghz and added that setting the naum.
But guess a Duron 900 does the job because people will use it to access the Internet, edit text and will rarely use heavy programs or q work with 3D.
---
A7N The only problem is that it can not run a video card with less than a GF2 (which nobody does it). Another question ---
. This motherboard comes with On-board or not
In the ad was:
"Asus A7N-266 Sound and Video - R $ 369.00 DDR"
That is not say anything on-board network although they say it has q network.
--- This network has on-board A7N266 VM A.Essa not A7N266-C.
- - Hello
I set this to a friend and gave a sound problem because the network card, and not updating the BIOS and changing the network card slot, it worked.
I had to change the model of network card, and it seem like there is some conflict in realamente pci, according to the asus site.
The one I used was the A7N266-C, no network .. .
Thankfully, this motherboard is Nforce cheaper, anything from 90 to 100 dollars.
Giga
Mobo for Intel FCPGA on PPGA burning
--- I do not know much about the line Intel, I have a socket 370 motherboard that I'm not sure if it works with Intel FCPGA (green). If it does not accept them, if I connect one to test it can cause immediate burning of the processor ---
Hmm .. q I would say because of the problem specification of voltage regulators, the processor can goes down because of overvoltage (my theory, not sure of this). --- And
aih staff, nobody speaks anything else Would if I connect a FCPGA a board I'm not sure grip FCPGA run the risk of burning the processor I'm afraid that what happens ffugita spoke!
PPGA and FCPGA --- refers to the technologies employed in the construction of the processor - that is encapsulation - no problems in using FCPGA processors instead of a PPGA as the pinout is the same. As the tension, this will depend on the capacity of your motherboard to offer lower voltages. Remember to do a BIOS update for the correct processor support. : Wink:
--- No problem you connect a processor in an FCPGA slot PPGA are the same slot if your motherboard support there will be no problem.
spoke .... ---
The hole is the same, but PPGA processors use the voltage slightly higher q-FC ... (2v against 1.7, 1.6 ...), so the reason I stay with the foot
ago ... Well, not hurt to try ... (At your own risk, of course).
T
--- Yes, FCPGA use lower voltages, but most of the mobos with Bios update already work. < BR>
spoke .... --- There
Mobo w / PPGA / FPGA, these classifications is p / processors, they are 370 and accept both, only tualatin is not supported by older that is not supported w / 1.4V.
joscar
---
Robertux Ae, what is your mobo
--- I have here a Pc-PChips M765VMRT with two slots: 370 and slot1.
370 only accepts PPGA, if I want to use a FC-PGA processor have to use a processor slot or an adapter.
of curiosity, I tried to put a PIII-750 in 370 and it just did not call, did not even post, but also does not burn.
I had to buy an adapter for it to work on this mobo. I rode yesterday
an M747 and PC-Pchips site says it only supports PII and Celeron PPGA. I installed the same PIII-750 and it did not recognize the processor to 750MHz but linked. She was extremely slow, like a 386, took about 10 minutes to boot in Win98, but working on the standard voltage processor. After much searching on the Net, I found a more updated bios for her (off-site PC-Chips, of course), and she began to recognize the processor and operating correctly, but with one problem: with the FSB to 100MHz, the onboard video of it (very good, although on board, a SiS6326 8MB - with its own memory) gives the image problems and freezes after a while. Apparently, the 8MB of video card accompanying the variations of FSB this mobo. You pass the FSB to 66 the video back to normal (or use a video card off board).
This will was just to say that each is a mobo mobo:
Some older, will not accept FC-PGA, others to accept, but updating the BIOS, so specify your mobo pro staff can help.
Tis more ... ---
Kra, this image problem showed on my SiS 620 and so I bought the Voodoo ... thankfully she has these problems, but I think it would still be onboard with this wonder ... : Twisted:
--- Dude I think you gave me a light!
M748 LRMT I have three! At the end of last year put three 600 Celeron 370 A sock naum wanted to call. I did everything and anything. I see a friend and he put an adapter on it and blz! Now the performance of this adapter in a Show otras even putting 3D card and 900Mhz Procesador other. I'll put the adapter in the other and see what the! : Lol:
--- My board is a Gigabyte GA-6WMM7, intel 810 chipset, post in the Dell logo appears (I think it is part of a batch fetch Dell after she took line computer model that used this card). In the shop where I bought (in Santa Iphigenia) tested the guy in front of me with a Celeron PPGA (black) and it worked nice. He assured me that worked with PIII and Celeron processor with 100 MHz bus clock of any, since that was not Tualatin. Ok, I tested with two processors FCPGA (green), a Celeron with 66 MHz bus and a PII with 100 mhz bus., Neither gave nor the post and then put it did not work any more on board, but I do not know if they were working before, both returned to the supplier. He assured that the processors were good when they gave me but took them back. Gigabyte's site says this board supports FCPGA from version 2.0. In my're writing Ver 4.1, but the site makes no dimension greater than version 2.0. I was a hell of a doubt as to the true version of this card. Version seems custom made for Dell. I was worried that the board had burned processors and I was afraid to buy another and burn out again and this time the loss. I do not know if I try to buy an Intel or seeing the plate and leave for a Duron. I think you just buy another Celeron if you're sure not run the risk of burning it. What is the opnion of you
--- If I were you changed the mobo ...
--- Someone help me more
Does the mobo being anterior to FCPGA she would have a minimum voltage of 2 volts and the processors would be burning before post This could happen ---
Gigabyte's site has a list of processors that it supports and, theoretically, she accepts 1.65v, but as the BIOS is modified by Dell
... Back in the pro shop and asks expensive to install a CuMine to see if it works, the problem is to burn it and you will still be able to replace the mobo with another.
Today, a single proc. Intel still is worth P4, so if you just want to take over an animal, but I still prefer an ECS-K7S5A Duron with. Then you will be able to change the memo on DDR, upgrade to Athlon, AthlonXP and God knows what else. 8)
--- I've seen that list and she is half esquista has multipliers that work on bus 100 and do not appear for 66 Mhz bus How to pay off, this machine would be a second machine, low cost, only for office applications and surfing the internet, replacing one that burned K6II 500 motherboard. The main machine is a signature. I am announcing the mobo on the trimming for U.S. $ 140.00 (no one pays anything here), if you can sell it I'll buy one and a K7S5A Duron or K7VTA2 or 3. A big hug and thanks to everyone who responded to this post.
sábado, 11 de agosto de 2012
Doubt on 1500 figures
---
Connections that use 1500-xxxx numbers (as iBest, for example) single pulse charge during special hours (00:00 to 6:00)
Thanks! ---
Ibest The numbers I have will not start with 1500 ...
But apart from that, who regulates the tarifagem is only the telephone company. Anyone else.
--- I've found the problem, he lives in Rio de Janeiro, not to live in Rio is a problem, it was just a manner of speaking ... hehe! You guys understand!
I've heard many times does a small qo iBest manipulation. For example, if there is congestion on a local line of them, they send the call to other nearby towns. There is more expensive ... But anyway from 0:00 to 6:00 is not charged any pulse, if I'm wrong, correct me!
--- Well, thanks a lot for the answers.
Ibest Aki in the Rio has a number 1500 and has another tb, I discovered recently that begins with 39 ... something! Thanks a
! --- Want to know
No provider, visit this site http://www.acesso-gratis.com/internet-gratis/index.asp
--- From what I know , a normal connection has a pulse duration of 4 minutes and links through 1500 only last two minutes and does not use differentiation.
--- This is news to me; this explains pq everyone complains that the phone bill increases after starting to use free internet. Where you got this information
But what no one can answer is the period from midnight to 6 am, the 1500 is also working on a single pulse. ---
Tbém I did not know this! Normal numbers are 4 minutes per pulse, of course ... Give a few more tips here, or enter a site, thanks!
--- Hey guys, I have phoned me and informed TELEMAR on the GI (15002000) and the clerk said that a single pulse was charged between 00:00 and 06:00, 02:00 06:00 ( between Saturday and Monday) ---
's staff here in my city internet for free just by Banco Bradesco, and the famous number 1500. Earlier that activated the service wanted to know about the pricing as well, and the company Telefonica said it is a local call with recovery of normal pulses. What many people do not know is that a call spends two pulses: a pulse in time to connect and more a pulse at the end of the link, that goes for all local calls.
--- Boy, it confers. Pulse at the end of the connection If so, will contradict all the hype around the national telephone system. Give up to enter the action in court ...
--- I know I'm a little late on this topic, but it means that I am newbie in the area .... This bid price is tricky ... I've seen rumors that a similar scheme works with iG Who knows ...:
Rehgis
Connections that use 1500-xxxx numbers (as iBest, for example) single pulse charge during special hours (00:00 to 6:00)
Thanks! ---
Ibest The numbers I have will not start with 1500 ...
But apart from that, who regulates the tarifagem is only the telephone company. Anyone else.
--- I've found the problem, he lives in Rio de Janeiro, not to live in Rio is a problem, it was just a manner of speaking ... hehe! You guys understand!
I've heard many times does a small qo iBest manipulation. For example, if there is congestion on a local line of them, they send the call to other nearby towns. There is more expensive ... But anyway from 0:00 to 6:00 is not charged any pulse, if I'm wrong, correct me!
--- Well, thanks a lot for the answers.
Ibest Aki in the Rio has a number 1500 and has another tb, I discovered recently that begins with 39 ... something! Thanks a
! --- Want to know
No provider, visit this site http://www.acesso-gratis.com/internet-gratis/index.asp
--- From what I know , a normal connection has a pulse duration of 4 minutes and links through 1500 only last two minutes and does not use differentiation.
--- This is news to me; this explains pq everyone complains that the phone bill increases after starting to use free internet. Where you got this information
But what no one can answer is the period from midnight to 6 am, the 1500 is also working on a single pulse. ---
Tbém I did not know this! Normal numbers are 4 minutes per pulse, of course ... Give a few more tips here, or enter a site, thanks!
--- Hey guys, I have phoned me and informed TELEMAR on the GI (15002000) and the clerk said that a single pulse was charged between 00:00 and 06:00, 02:00 06:00 ( between Saturday and Monday) ---
's staff here in my city internet for free just by Banco Bradesco, and the famous number 1500. Earlier that activated the service wanted to know about the pricing as well, and the company Telefonica said it is a local call with recovery of normal pulses. What many people do not know is that a call spends two pulses: a pulse in time to connect and more a pulse at the end of the link, that goes for all local calls.
--- Boy, it confers. Pulse at the end of the connection If so, will contradict all the hype around the national telephone system. Give up to enter the action in court ...
--- I know I'm a little late on this topic, but it means that I am newbie in the area .... This bid price is tricky ... I've seen rumors that a similar scheme works with iG Who knows ...:
Rehgis
LTSP - load incomplete
--- I'm trying to use LTSP in runlevel 5, everything is going ok, but the X does not load even the login, just keep the cursor in the middle of the screen (up to work the mouse).
video card terminal is a ati mach 64, and by the way is correctly configured.
does anyone have any tips
--- What distribution do you use
LTSP is LiteStep
I think it's going into text mode ..
xinit # # ltsp (or the name of load)
see if it works.
Hugs
--- =
LTSP Linux terminal server project
my distribution server is
MDK 8.2 version of the core is the LTSP 3.0.5
--- This may be that the server holding a tah!
Then you have to use the xinit as drusian soh told to load the application that matters!
< BR> #-xinit and gnome (this way you load the gnome)
soh to load the application I naum know what the parameter h!
try there
# xinit -and netscape (never tested)
or has the possibility of video card or monitor naum be properly configured!
I understand a lot of it naum more for what I understood h Output this! if you have something wrong aê disregard!! ---
Kleber,
what I do is run a diskless machine starting from a linux server as a "dumb terminal". but the boot does not complete the load of X, lacking the login screen. Login as lack, as I will execute any command understand --- Dude ....
also use the LTSP and was a sacrifice to make it run X ....
I was told that it only works press the video card is identical to the station server
..... I've been researching and found a way to rotate is to create a file with the client settings and put it in the directory / opt/lts/i386/etc /
.... But the hard diss is that if you have clients with different plates, the thing ......
press tries to make it and e qq thing tamos ..... --- X-
mind,
lts.conf you mean
My already configured, and X starts, but the logo and the LTSP login does not come no way .... ---
Tries to do the following.
On the server open / etc/X11/xdm/Xaccess
Look for a line that starts with an '*' (without the quotes)
If this line is commented out (is starting with a '#'), uncomment it (remove the '#').
To that end get the login screen, the file server must have this line starting with an '*', this is not commented.
Try it and tell me what happens. ---
Edward
have 3 lines, 2 and 1 commented uncommented, starting with * in Xaccess:
* # any host Can get the login window < BR> * Indirect CHOOSER BROADCAST # any host chooser
Can get the * #% hostlist # CHOOSER
latter is the list of hosts, you think if I change it by putting the terminal name resolves
--- Folder / opt/lts/i386/etc exists an XF86Config file that is an image of XF86Config server ....
If you edit this file you will see that it tah
blank .... Make a copy by changing the settings for the client and replace this file by the previous .....
--- X-mind,
this file does not exist in my folder .....
what's in your file
--- If X carries (that gray screen with the mouse), then the problem and not the video card (or the XF86config).
XF86config This does not matter for anything. He recreated the client machine, the script start_ws, if I mistake not.
The problem you are having, and that X ta not getting a login screen.
To resolve this, see if kdm (or xdm or gdm) is running on the server (if it is booting into graphic mode, this).
ae said boot like this for your server ...
And if you're booting into graphic mode, says the kdm, xdm or gdm, that there's to solve the problem. ---
Tb'm w / the exact same prob.!
But w / LTSP or log gives remote!
Use MDK9 in server and CL8 at the station, which has the same peripheral server. (= video card)
The server goes into graphics mode ... just do not know if c / XDM, KDM etc ... as and find out what to do
KDM is the KDE boot manager GDM Gnome Or nda to do
Questions are then read with Divx ---------------------->
---
These tips are designed to help beginners in the world divx, which have many questions and maybe even the initiated find some answers.
: Wink:
DivX - Key Questions < / B>
Requirements:
software needed to watch DivX movies:
To watch DivX movies you need to install the DivX codec, DirectX and an player that supports the codec.
Hardware Requirements to watch DivX movies:
All you need is a computer fast enough. No one knows for sure which are the minimum requirements, but the recommended is nothing less than a 300MHz Pentium running Windows 9x/NT/2000/XP. For computers AMD K6/K6-2 the minimum should be an AMD K6-2 400MHz.
Problems watching DivX movies, DivX Movies
not play and I do not understand why:
The most important thing is to determine if the problem is to install its codec or if the movie you are trying to watch is corrupted. Try downloading another video, and if you give the same problems / errors, then one can conclude that the installation of your codec was not successful, and you must reinstall it. If he touches usually the problem must be with the movie you downloaded, it must be incomplete (corrupted).
Incomplete DivX movies will not play: There is a program called
DivFix, which which can be used to rebuild the index of the films that were partially downloaded, it usually has some problems, but if you want to use just remember to backup the movie incomplete, because after the reconstruction of the index will be impossible to continue to download it. There is another program that enables you to watch movies partial, and works best, it is the AVIPreviewC that can be found at: http://
www.funkster.org/
The sound is working but no picture:
This error occurs when you try to watch a movie, which which does not have codec installed on your machine. Fortunately there is an easy way to fix this problem. All movies AVI, contains a FOURCC code in the header file, which can be used to identify the video codec required to watch the movie. To determine which codec is missing download the program Movie Type Finder and open the movie. Then you will be able to download the correct codec: Video Codec FOURCC
DIV3 DivX codec v3.11 alpha
DIV4 DivX DIVX DivX codec v5.02
MP43 SMR codec v5.02 patch
Or you can simply install codecs Maximum possible, at least it will be harder to have problems with codecs in the future. To do this download and install the Nimo codec pack called, you can find it on search engines like google, for example.
The image is showing, but no sound:
First you need to find out if the error is in the movie that you downloaded or are in the configuration of your system. You can try to find it playing an MP3 file on your machine. If it does not touch you need to figure out how to fix your machine.
Is important to know what video and audio are two separate things, which which combined form the film. The DivX codec does the video decoding, but has nothing to do with the decoding of the audio. If the sound is not working you should find out which audio codec is missing and install it.
To find out what codec you should install, first download the program VirtualDub and open the movie. Then go to File menu and choose "File information". There you will have information about the video and audio streams. See field compression it tells you what audio codec is required.
If the audio codec that you need to install call, for exemploivX audio, you must install the codec DivX codec v3.11 alpha, which includes this codec.
Also try installing the codec AC3 (Dolby Digital 5.1) which can be found at this link:
http://home.student.utwente.nl/m.veger/mirror/dvd2avi_gui/ac3_filters.zip
The image is showing, but no sound:
Try installing the codec AC3 (Dolby Digital 5.1) which can be found at this link:
http://home.student.utwente.nl/m. veger/mirror/dvd2avi_gui/ac3_filters.zip
The image freezes but the sound remains normal:
The movie you are trying to view may contain errors. Some of their frames may be invalid, this occurs when you do a "resume" when downloading. To correct invalid frames you can try downloading the movie again or manually delete the frames with virtualdub. There is a program called DivX AntiFreeze, once installed will prevent freezing permanent, but will not correct invalid frames.
The picture is very dark when I watch DivX movies:
If the image is too dark you can change the settings for brightness / contrast. Go to the File menu in Windows Media Player and select Properties (make sure you have a divx movie opened). Then click the Advanced table and select "DivX MPEG-4 DVD Video Decompressor", then click Properties. A new window will open and you can change those settings.
The image is upside down when I watch DivX movies:
Some people have reported this problem and most were using Windows XP. The latest version of divx codec 5 has corrected this problem.
The picture and sound are desincronizados:
The reason this happens is that your processor is not fast enough to play DivX movies You can try to defragment your disk, close programs that are using memory. We recommend using the Bsplayer because it uses minimal CPU. Or between the properties of DivX, and lower the "Quality Level" ear "PostProcessing."
What is codec
The word codec is a mix compressor / decompressor. When you install a codec on your computer, what you're doing is giving instructions to the player how to compress / decompress movies in that format. If the required codec is missing you will receive an error message.
What is DivX codec
Every time you play a video file with a player, it parses the file to determine its format, then this means algorithm instead of format. The algorithm is the basis of all the compressed files (MP3, images, video, zip etc ...), is a procedure that simply executes arithmetic to compress a file (eg ZIP files). The same method is used for multimedia files (video, audio). Each compressed file has to have its extractor, or in other word your decoder (for example, to open ZIP files you need a program like Winzip). For video and audio files, the type of extractor / decoder is called "codec" where "co" is "compressor" and a decompressor "dec." "Codecs" can only be performed by players. They are as add-ons for the players, and once a video file is loaded, the compatible codec is run to start the settlement procedure ALGORITHM and finally playing the file.
Where can I download movies
In eDonkey, Overnet, Kazaa, bearshare, direct connect, etc. ehehehe
How big is a full DivX movie This
film to film varies depending on how the audio / video has been compressed, but on average an entire film has about 700 MB-600, ie the size of a CD.
You can watch DivX movies on a DVD player
No, it is impossible since the DivX codec uses MPEG-4 video and DVD players only support playback of MPEG-1 and MPEG -2 video. The only way to watch movies using a DVD player is convert it to VCD or SVCD. The quality is inferior to VCD DivX movies, but can be played on most DVD players. For more information on how to perform this conversion visit VCDHelp (http://www.vcdhelp.com) and read all the guides.
You can watch DivX movies on my TV
Yes, but it requires a video card that supports TV output (TV out). More
good software:
CodecViewer v1. 5 shows
which codecs you need to see the divx file.
http://www.kryptocrew.de/snakebyte/prog/CodecViewer_v1.5.zip
< BR> Nimo Codec Pack V5.0 build 7
Download ---
Bela class!
Congratulations! As the Americans say.
--- I can only clap! ---
Really cool ... I put a copy in
topic fixed it in MP3, DIVX, Writing, so everyone can read ... enter q ---
UP ...
--- Tah very good!! ---
Very useful information.
This type of collaboration is what makes our forum so interesting.
Congratulations and thank you. ---
Faiz a tutorial subtitles and syncing
--- Excellent topic ........... very enlightening
---
Great topic! In addition to presenting solutions to problems, still has direct links to download programs.
Congratulations, Goldsmith! : Wink: ---
tbém agree ... Goldsmith and people like you interested in helping are rare in today's world. Congratulations! --- Some
administrator or moderator could put this topic as fixed, or something, right !
Gold Thanks!
--- Very cool ---
Oops, I put as fixed and moved the forum Tips and News to here, where it will be seen and helpful, I think. ---
Classes like this that make me like this site very much, and give all people who ask me for information.
Thanks.
: Lol: : lol: ---
Great, excellent, perfect, nice and all the other synonyms.
Congratulations!
For these and other reasons, I say : when very old (stick and all) will still be accessing the site and the forum X255. Can you imagine: a quasilhão posted messages.
There will also be a forum called: Posts Logs. Well, in this case, there is already a strong candidate: the one topic of adhesive plated trinitro posted by our friend.
I can even say that in the early morning, at work, when I run internet explorer is not the Yahoo Mail I first access, but the X255 Forum.
Completing: congratulations to all users of this forum.
--- Very cool. : P: P: lol: ---
has www.doom9.org site is very good tb. ---
E Goldsmith, congratulations for the beautiful CLASS! hehehehe ... I was needing to make a recycled!
Thanks! : Lol :: lol :: lol: ---
the faq Brazil divx is like this, but ta very good! : Lol:
These tips are designed to help beginners in the world divx, which have many questions and maybe even the initiated find some answers.
: Wink:
DivX - Key Questions < / B>
Requirements:
software needed to watch DivX movies:
To watch DivX movies you need to install the DivX codec, DirectX and an player that supports the codec.
Hardware Requirements to watch DivX movies:
All you need is a computer fast enough. No one knows for sure which are the minimum requirements, but the recommended is nothing less than a 300MHz Pentium running Windows 9x/NT/2000/XP. For computers AMD K6/K6-2 the minimum should be an AMD K6-2 400MHz.
Problems watching DivX movies, DivX Movies
not play and I do not understand why:
The most important thing is to determine if the problem is to install its codec or if the movie you are trying to watch is corrupted. Try downloading another video, and if you give the same problems / errors, then one can conclude that the installation of your codec was not successful, and you must reinstall it. If he touches usually the problem must be with the movie you downloaded, it must be incomplete (corrupted).
Incomplete DivX movies will not play: There is a program called
DivFix, which which can be used to rebuild the index of the films that were partially downloaded, it usually has some problems, but if you want to use just remember to backup the movie incomplete, because after the reconstruction of the index will be impossible to continue to download it. There is another program that enables you to watch movies partial, and works best, it is the AVIPreviewC that can be found at: http://
www.funkster.org/
The sound is working but no picture:
This error occurs when you try to watch a movie, which which does not have codec installed on your machine. Fortunately there is an easy way to fix this problem. All movies AVI, contains a FOURCC code in the header file, which can be used to identify the video codec required to watch the movie. To determine which codec is missing download the program Movie Type Finder and open the movie. Then you will be able to download the correct codec: Video Codec FOURCC
DIV3 DivX codec v3.11 alpha
DIV4 DivX DIVX DivX codec v5.02
MP43 SMR codec v5.02 patch
Or you can simply install codecs Maximum possible, at least it will be harder to have problems with codecs in the future. To do this download and install the Nimo codec pack called, you can find it on search engines like google, for example.
The image is showing, but no sound:
First you need to find out if the error is in the movie that you downloaded or are in the configuration of your system. You can try to find it playing an MP3 file on your machine. If it does not touch you need to figure out how to fix your machine.
Is important to know what video and audio are two separate things, which which combined form the film. The DivX codec does the video decoding, but has nothing to do with the decoding of the audio. If the sound is not working you should find out which audio codec is missing and install it.
To find out what codec you should install, first download the program VirtualDub and open the movie. Then go to File menu and choose "File information". There you will have information about the video and audio streams. See field compression it tells you what audio codec is required.
If the audio codec that you need to install call, for exemploivX audio, you must install the codec DivX codec v3.11 alpha, which includes this codec.
Also try installing the codec AC3 (Dolby Digital 5.1) which can be found at this link:
http://home.student.utwente.nl/m.veger/mirror/dvd2avi_gui/ac3_filters.zip
The image is showing, but no sound:
Try installing the codec AC3 (Dolby Digital 5.1) which can be found at this link:
http://home.student.utwente.nl/m. veger/mirror/dvd2avi_gui/ac3_filters.zip
The image freezes but the sound remains normal:
The movie you are trying to view may contain errors. Some of their frames may be invalid, this occurs when you do a "resume" when downloading. To correct invalid frames you can try downloading the movie again or manually delete the frames with virtualdub. There is a program called DivX AntiFreeze, once installed will prevent freezing permanent, but will not correct invalid frames.
The picture is very dark when I watch DivX movies:
If the image is too dark you can change the settings for brightness / contrast. Go to the File menu in Windows Media Player and select Properties (make sure you have a divx movie opened). Then click the Advanced table and select "DivX MPEG-4 DVD Video Decompressor", then click Properties. A new window will open and you can change those settings.
The image is upside down when I watch DivX movies:
Some people have reported this problem and most were using Windows XP. The latest version of divx codec 5 has corrected this problem.
The picture and sound are desincronizados:
The reason this happens is that your processor is not fast enough to play DivX movies You can try to defragment your disk, close programs that are using memory. We recommend using the Bsplayer because it uses minimal CPU. Or between the properties of DivX, and lower the "Quality Level" ear "PostProcessing."
What is codec
The word codec is a mix compressor / decompressor. When you install a codec on your computer, what you're doing is giving instructions to the player how to compress / decompress movies in that format. If the required codec is missing you will receive an error message.
What is DivX codec
Every time you play a video file with a player, it parses the file to determine its format, then this means algorithm instead of format. The algorithm is the basis of all the compressed files (MP3, images, video, zip etc ...), is a procedure that simply executes arithmetic to compress a file (eg ZIP files). The same method is used for multimedia files (video, audio). Each compressed file has to have its extractor, or in other word your decoder (for example, to open ZIP files you need a program like Winzip). For video and audio files, the type of extractor / decoder is called "codec" where "co" is "compressor" and a decompressor "dec." "Codecs" can only be performed by players. They are as add-ons for the players, and once a video file is loaded, the compatible codec is run to start the settlement procedure ALGORITHM and finally playing the file.
Where can I download movies
In eDonkey, Overnet, Kazaa, bearshare, direct connect, etc. ehehehe
How big is a full DivX movie This
film to film varies depending on how the audio / video has been compressed, but on average an entire film has about 700 MB-600, ie the size of a CD.
You can watch DivX movies on a DVD player
No, it is impossible since the DivX codec uses MPEG-4 video and DVD players only support playback of MPEG-1 and MPEG -2 video. The only way to watch movies using a DVD player is convert it to VCD or SVCD. The quality is inferior to VCD DivX movies, but can be played on most DVD players. For more information on how to perform this conversion visit VCDHelp (http://www.vcdhelp.com) and read all the guides.
You can watch DivX movies on my TV
Yes, but it requires a video card that supports TV output (TV out). More
good software:
CodecViewer v1. 5 shows
which codecs you need to see the divx file.
http://www.kryptocrew.de/snakebyte/prog/CodecViewer_v1.5.zip
< BR> Nimo Codec Pack V5.0 build 7
Download ---
Bela class!
Congratulations! As the Americans say.
--- I can only clap! ---
Really cool ... I put a copy in
topic fixed it in MP3, DIVX, Writing, so everyone can read ... enter q ---
UP ...
--- Tah very good!! ---
Very useful information.
This type of collaboration is what makes our forum so interesting.
Congratulations and thank you. ---
Faiz a tutorial subtitles and syncing
--- Excellent topic ........... very enlightening
---
Great topic! In addition to presenting solutions to problems, still has direct links to download programs.
Congratulations, Goldsmith! : Wink: ---
tbém agree ... Goldsmith and people like you interested in helping are rare in today's world. Congratulations! --- Some
administrator or moderator could put this topic as fixed, or something, right !
Gold Thanks!
--- Very cool ---
Oops, I put as fixed and moved the forum Tips and News to here, where it will be seen and helpful, I think. ---
Classes like this that make me like this site very much, and give all people who ask me for information.
Thanks.
: Lol: : lol: ---
Great, excellent, perfect, nice and all the other synonyms.
Congratulations!
For these and other reasons, I say : when very old (stick and all) will still be accessing the site and the forum X255. Can you imagine: a quasilhão posted messages.
There will also be a forum called: Posts Logs. Well, in this case, there is already a strong candidate: the one topic of adhesive plated trinitro posted by our friend.
I can even say that in the early morning, at work, when I run internet explorer is not the Yahoo Mail I first access, but the X255 Forum.
Completing: congratulations to all users of this forum.
--- Very cool. : P: P: lol: ---
has www.doom9.org site is very good tb. ---
E Goldsmith, congratulations for the beautiful CLASS! hehehehe ... I was needing to make a recycled!
Thanks! : Lol :: lol :: lol: ---
the faq Brazil divx is like this, but ta very good! : Lol:
Page 3 ---
Really good, I was asked what codec will come down there and the answer to my question ---
Rises it is interesting. : Idea: ---
Great story! I really needed a little class so detailed.
--- Up! ---
Friend, this undoubtedly was the best topic related to Divx (if the only naum, hehehehehe), shit face tah SHOW!! ---
Great tips, a sum is deserved.
--- I think not, things move at a rapid pace in this field, not to mention Goldsmith forgot to say that NEVER INSTALL a package of CODECS, NiMo type, if you ever want a DO Divx. This bagunçaria all. We have dozens of tragic examples here in the forum about Divx codec packs. Do not install them, not to be to "watch".
Falow!
--- Hello!
Always wanted to find something about divx most complete and ask questions and such!
I searched and found this SITE!
To the problem with audio!
the media player tries to find any codec but to no avail, i found this here and installed VirtualDub, giving the play the video has appeared mistake!
i saw the information and compression tava writing unknown (tag 0161) < BR> and it's not just a video,
ac3 codec and I do not know to install,
what I do
--- Please!
Someone ---
Seguinti rapah takes the nimo codec pack q it has the audio codec ac3
this audio format used in movies eh entaum dvd if you edit or naum New Releases dvd movies on pc or --- need to install
ACE Mega Codecs Pack is good I got it and installed it until now .... ta blz
falowwwwwwww
--- The first link to download the Nimo Codec problem with ta! And one more strange thing, I was here with no apparent problems images, but I wanted more codecs to have no problems, and NiMo qdo installed, most of the videos are gone ... and the image qdo I took it back to normal ... it should not only help
pq it
falowwwwwww
Athlon XP1600 w / FBS 150MHZ voltage 185v Temp 46. damages
---
My Athlon XP1600 w / 150MHZ FBS voltage 185v 46graus Temp.
I was wondering if damage my machine
I use PC266 memory ddr 512 MT (brand ), geforce 2 MX200 32MB, soyo dragon plus.
my machine this takes about two years
with this all my machine is overclocked XP1900.
I use windows XP Pro machine and this super stable, I've bechmarks, test temp and it was all approved.
--- The main attention should be given the temperature and stability, as you reported that is under control, have nothing to fear.
--- While the other boards
My micro lasts 2 years
--- If the fans do not fail hard. ---
With this temperature and stability, should last long!
--- With 45 ° C do not worry. Voltage 1.85 V.
My Athlon XP1600 w / 150MHZ FBS voltage 185v 46graus Temp.
I was wondering if damage my machine
I use PC266 memory ddr 512 MT (brand ), geforce 2 MX200 32MB, soyo dragon plus.
my machine this takes about two years
with this all my machine is overclocked XP1900.
I use windows XP Pro machine and this super stable, I've bechmarks, test temp and it was all approved.
--- The main attention should be given the temperature and stability, as you reported that is under control, have nothing to fear.
--- While the other boards
My micro lasts 2 years
--- If the fans do not fail hard. ---
With this temperature and stability, should last long!
--- With 45 ° C do not worry. Voltage 1.85 V.
That site delivery abroad in Brazil a geforce 4
--- What
foreign website that delivers in Brazil can buy a geforce 4 mx 440 Will shop there eh advantage or right here
8) ---
but because the devil would be advantage to import it type, you have to pay 60% tax to the customs baxah :/ ---
under $ 500 do not pay taxes a second auditor friend
q --- I know this ceiling of $ 500 h only when qqr person spends with the merchandise, but not worth when importing eh 'PURE', type, qdo merchandise comes by freight. I think this link explains it all down here ::::
http://www.bol.com.br/servicos/imposto/importa.html
--- This board is already sold here, right now the site that sells ... : :
By talking about her, I learned that the top's Titanium series of GForce 3 are faster ... do not know if it's true ... : ---
The GF3 has some advantages ... but more expensive .. ---
Was ill the 100kb image :/ / jah
both the MX440 as the GF3 has http://www.waz.com.br / tabela.txt
: wink: ---
Gforce 4! Get an ATI 8500 to 9000 series there you will see where the Gforce is 4!! --- Try
import from Paraguay, should get out more into account: wink:
---
naum understand .. if you read the right to lose to GF4 9000 8500 ... and you forget it ..
is who will win the 9700 .... ---
9000 was made to compete with the GF4 MX ... : Roll:
foreign website that delivers in Brazil can buy a geforce 4 mx 440 Will shop there eh advantage or right here
8) ---
but because the devil would be advantage to import it type, you have to pay 60% tax to the customs baxah :/ ---
under $ 500 do not pay taxes a second auditor friend
q --- I know this ceiling of $ 500 h only when qqr person spends with the merchandise, but not worth when importing eh 'PURE', type, qdo merchandise comes by freight. I think this link explains it all down here ::::
http://www.bol.com.br/servicos/imposto/importa.html
--- This board is already sold here, right now the site that sells ... : :
By talking about her, I learned that the top's Titanium series of GForce 3 are faster ... do not know if it's true ... : ---
The GF3 has some advantages ... but more expensive .. ---
Was ill the 100kb image :/ / jah
both the MX440 as the GF3 has http://www.waz.com.br / tabela.txt
: wink: ---
Gforce 4! Get an ATI 8500 to 9000 series there you will see where the Gforce is 4!! --- Try
import from Paraguay, should get out more into account: wink:
---
naum understand .. if you read the right to lose to GF4 9000 8500 ... and you forget it ..
is who will win the 9700 .... ---
9000 was made to compete with the GF4 MX ... : Roll:
Red Hat 7.3 Install does not want to "Not At Pau, Why "
--- Hello, this topic is interesting while it is still intriguing, see:
"I was with my 40GB HD partitioned into C27GB with Win98), with D5GB WINXP-PRO) and the remainder (5GB, had mandrake 8.2) in ext3. How numca had used Red Hat 7.3 before and wanted to test it, I downloaded the 3 cd and then install where I had installed mdk8.2 (formatted in this time with ext2 Partition Magic). Dei BOOT and put the red hat cd in the drive, started the installation process, when it came to partitioning screen that has 3 options (automatically install, disk druid, fdisk) selected the second option and then I was returned a message stating that the hd was faulty, or that there was error in the attempt to read and / or record (something like this) and could only continue with the installation if I clicked "YES" where would I lost all my data saved on hd finally clicked "NO" and so I was told that the installation could not continue the installation process finished, pulled out the CD and did an automatic reboot, well, waiting I obviously my win98 would boot with my winxp I've read a message on the screen where it was impossible to switch between the win98 and winxp a message in English saying that it was not possible to initialize the disks and a lot of numbers as if they were logical addresses referring partition tables. "MORAL OF THE STORY LOST ALL MY DATA! "After many frustrating problems in an attempt to recover most of my data without success (could recover a maximum of 255mb files which I was not very useful since it had a lot of movies and games and lost all FULL ). formatted the hd with the DOS fdisk and installed win98 again and this time I left it alone. Even knowing the risks they ran, after leaving my win98 tuned to run the way I like it then "AGAIN" try to install RED HAT, and to my surprise GAVE THE SAME PROBLEM BUT THIS TIME ERROR selected in FDISK and returned the error message and then the process reported that there was a failure and abnormal that everything would be finished, and rebootou cospiu the cd and so far no know how to install red hat 7.3 on my hd. As mdk8.2 was on my HD and could not recover, I have no more installing it 'cause I lost. Well, my question is: "HOW TO INSTALL THEN RED HAT 7.3 "partitioner WINDOWS IS THERE ANY OTHER THAN A M3RD @ THE PARTITION MAGIC TO LEAVE ME A FORMAT OF THE AREA IN HD EXT3 RED HAT FOR DOING SO THAT I CAN CHOOSE THE OPTION OF THE CD DISK DRUID TO SELECT THE AREA THAT formatted FOR LINUX "
await the contribution of those who CAN" HELP ", and please do not mess up.
Thank you in advance and bye.
Notes: * The
hd does not have bad blocks, I've done all the tests you can imagine.
* The media are new, before burning each cd did the checksum of ISOs to see if everything was ok and was . ---
do it all with the cd installation MDK!
you delete the partitions that exist jah (all)!
98 creates a pro, a pro XP pro 3 and other HR!
98Se = Primary
XP and RH will stay in the extended! as follows
1 - primary (98)
2 - Extended
=> XP
=> RH (within that you create the 3 partitions)
you need to soh procupar with the formatting of the primary naum pq has the format in the installation, then you will either have to do before!
Remember all this is done with the cd MDK! < BR>
you install 98 after XP!
when you are installing the RH dah you boot from the cd and go in disk druid lah, lah tah jah will cute, all ready to install! eh soh you check the option to format the partition (in the 3 hr) and presto! ---
Thanks friend, but do not know if you noticed I said in my message that no longer had the mandrake cds! There is no other way to do this ---
putz you ended up losing everything
Botaria Well I usually blame the partitioner of mandrake - you used the msa PM ... I usually use cfdisk from linux w / creating partitions.
I think:
or HR that you have corrupted ta;
or he has some incompatibilities with your hard;
or some nasty bug.
If he gave the same error 2 x the problem must be the same RH, unless there is something wrong in your HD.
It is the warning w / whoever is installing the miscreant. : Cry: ---
Faaala Wooky, jewelry Well rapaiz, nor that his hand said, still tried everything, I waited another day trying everything as it was way, international forums, icq migos, help from other friends and nothing .. As
EasyRecovery only recovered in my case files up 255mb no avail since most had at least they were 700mb movies and games and ISOs SOs.
See Wooky that as I said in first post above, you can check, I did and ALWAYS DO the checksum of ISOs just to avoid CRC errors when installing it is not the case with this problem. ALSO AS informed the hd does not have any error, several tests and did not have any error, now that is strange that this problem happened to me is certainly a lot .. because I lost no less than 20GB of data very important, very film, a lot of music, affe can not even talk or I'll cry .. sniff, sniff .. : P But as you said
, q be reported to experience this event.
Keep trying to install RH 7.3 and I could not until now and I can not think .. The mdk 8.2 I abolish, because REALLY is SOOOO SLOW .. It's impossible to use.
wooky ae te .. eheuheueheh
.. --- I
up in the old
Logon Domain (windows client) on Linux server
--- Q
know this should be simple, but as I've never done alone (always someone made to me and I was looking) I d help v6.
I have a redezinha of 5 machines.
A data server samba and the stations w98.
I set them to make "log" in the NT domain (samba).
How can I do it What settings need to add the server and clients Plz, are clear (they are explaining to a semi-layman) and from the basic step-by-step.
Thank you! --- Www.google.com
I found some 6000 pages talking about it:) Hugs
know this should be simple, but as I've never done alone (always someone made to me and I was looking) I d help v6.
I have a redezinha of 5 machines.
A data server samba and the stations w98.
I set them to make "log" in the NT domain (samba).
How can I do it What settings need to add the server and clients Plz, are clear (they are explaining to a semi-layman) and from the basic step-by-step.
Thank you! --- Www.google.com
I found some 6000 pages talking about it:) Hugs
Xcopy command time in Oz Member
--- Hello people,
I need to copy an entire CD with all directories starting from the DOS prompt.
How not know why the charge d'agua CDROM It does not work when I command the F: \ setup as this command is to begin installing the operating system (Win95, 98 and ME) in HD.
In the case above the display screen is dark without access anything . i decide to play dirty with the Micro.
I copy the entire contents of the CD to HD partition uam and tries to install the same.
At first I have a Boot Disk generated in the ME and when I type the command:
A: \ xcopy f: \ *. * d: \ win95 \ *. * / s
F: is CDROM
D: \ is the HD partition free.
mesagem appears saying that a DOS version is something else to that effect.
anyone know if there is another similar command. ---
XCOPY32 I use and always work but it seems that the diskette has naum done by the system, so floppy that comes with windows but if you want I can send you by email.
--- One thing is very useful to put the boot disk some more commands, DOS, such as Fdisk, Format, Xcopy and others, according to the user. Until doskey can be interesting
--- Hello everybody
Dear Amateur-jp I would be grateful if you could send to my e-mail jvld@ig.com.br. : Lol:
Until I can make a boot disk w / Win 95 only has a detail not remember what it was like the commands to include support for CDROM.
Since the Micro is the fuck me, and does not accept the boor and Disk Win98 and ME have to turn around.
Auma once I can find a site that had almost every Windows boot disks with CDROM support, but I do not remember what the address, I tried doing a search on yahoo, I had no success.
: evil: Hugs
---
boot disks
Try http://www.xpmania.clic3.net this one. This site is a member of the forum.
--- Hello, I've
resolvir my problem, I took the machine and threw the ninth floor of the building I live.
Kidding,,
I downloaded the boot disk and it Win95B xcopy32 fear and also support for CDROM.
The funny thing that after several unsuccessful attempts with the network installation win9x me the son of a good mother decided to install the machine's own System CD. : Twisted: But
~ so thanks for the collaboration of all. Hugs
Recorders and Cyberdrive Optorite 16x12x40 oq tell me
--- I would like to know the views on these recorders!
--- From what I heard, the two recorders are manufactured by the same manufactures.
See more informations on the websites:
http://www.optorite.com and http:// www.cyberdrive.com
--- but what about quality ---
And Ai ta, I do not know, never got any of these recorders for testing. :! :: : ---
Optorite I already bought 2 .. one for a client and one for my fiancee
he is good .. nothing so awesome ... he's kind of cool to read some medias, but did not refuse any. sometimes irritated me with the freshness of it with cds ... but then he read to wait ..
to record was perfect, fast and efficient ... I recorded some movies to blast it was ....
great to ... well ... they are worth the low price, but if you can, get an LG
--- Um, so he and an optimal benefit / benefit because the cost has almost no walks. : P
From what I saw, the writers of Optorite sound recorders cheaper Paraguay, I saw a 16X for $ 39.00.
--- I bought cheaper ... $ 36 u ... the navenet.com
--- Jeez, even cheaper! That the or - R $ 115.00 .
--- Let's see if they are good as the LG! ---
Cd rom micro flower girl's mother went to the stick, I'll buy one of these and see the writer gives q!
--- At least the writers is warranted for 6 Optorite meses.Voce will have half a year to detonate it. : Twisted:
---
naum it ... hehehe ... they frescaram to read some cds ... though naum no ... I refuse to recognize lg time .... and naum has buffer underrun protection ....
to write .. but until they were well
--- Hello everybody!
al trinitro say, delivery personnel navenet or you'll get there in PY.
--- I think you made a mistake, the Optorite recorders have Buffer Underrun protection yes, so that the name and the name of technology and diferente.O EXAC Link.Pode see the features of the recorder.
Connecting pc
--- I called my pc with the keyboard, but I did not know what I have now q q push the button, q can be
--- This option is usually in the BIOS, maybe you have accidentally disabled, verifiuqe something like "power on keyboard."
3d video
--- How do I install the support of my Asus GeForce 3D in linux
Games like Quake, TuxRace, etc. I think naum run for it ... the card was detected and installed in the installation of the system and think it was without that support 3d .... thank
. ---
NVIDIA provides drivers and TBM has Xfree that has 3D support and others do not, depends on the version. ---
Download these two unpack both tar-zxvf
nomedoarquivo.tar.gz
from the folder you created
cd / pastaqueelecriou
and commands make
make install NOTE: Always make the "kernel" first, then the GLX!
Now you must edit the file / etc/X11/XF86Config or XF86Config-4 (depends on on what your uses linux) and edit alugas lines there.
q Read the README comes with one of the files you downloaded ... q explains everything right there.
After finishing just q reboot the next boot it will be displayed in the nvidia logo at boot.
Hug
problems with kazaa. tb someone
--- Hello
personal
is happening here in my house something a little strange. When I open the kazaa naum then I can use any keyboard key otherwise the program (which the keyboard was used) latch.
With a lot of my friends naum absolutely nothing happens, soh I installed a q tb him have this problem.
q Have anyone have this problem thought I could be the installation but I know it can be naum guess this:
Q be passed or someone goes through somebody problem like this
This happened with the old version of kazaa got the new and continued: roll :: roll :: roll:
q
will someone give me a light : Idea :: idea: i won
people
--- I have no idea of q may be happening. Try kazaa download and install from other sources ...
What OS do you use ---
Entaum since I got in and I think SuperDownloads perfectly safe. I use XP and that my friend uses tb is it
But I have another friend uses kazaa q exp
--- please
personal guess a lot of people here have the capacity q
respond
al
UP --- This
KAZAA LITE version is not right.
Why not try the LITE.http :/ / www.SITEX255.net/viewtopic.php t = 14 522
personal
is happening here in my house something a little strange. When I open the kazaa naum then I can use any keyboard key otherwise the program (which the keyboard was used) latch.
With a lot of my friends naum absolutely nothing happens, soh I installed a q tb him have this problem.
q Have anyone have this problem thought I could be the installation but I know it can be naum guess this:
Q be passed or someone goes through somebody problem like this
This happened with the old version of kazaa got the new and continued: roll :: roll :: roll:
q
will someone give me a light : Idea :: idea: i won
people
--- I have no idea of q may be happening. Try kazaa download and install from other sources ...
What OS do you use ---
Entaum since I got in and I think SuperDownloads perfectly safe. I use XP and that my friend uses tb is it
But I have another friend uses kazaa q exp
--- please
personal guess a lot of people here have the capacity q
respond
al
UP --- This
KAZAA LITE version is not right.
Why not try the LITE.http :/ / www.SITEX255.net/viewtopic.php t = 14 522
How to write a log of the boot information
--- I do that I know where to fix the startup of the network card, whose driver is loaded incorrectly, so I have to go into kde to always initialize it (do not know any other way) ---
Snakey, the information system startup are written to / vaar / log / messages, but you can access them with the command 'dmesg | more'.
The network card, then tell me which brand and model for me to see if we can help you.
[]!
--- Enter the home dir of the root and the command: dmesg >>
meuboot
cat | less meuboot
or tac | less meuboot
or VI meuboot
Or any editor that you want to use: emacs, jove, jed, hehe mcedit in
Fuca plate load script gives the commands and plays .. Hugs
Normal operating range of temperature of an Athlon XP 1700
---
Galera follows. I just did an upgrade (I'm going to change the signature) for a ASUS A7S333, Athlon XP 1700, GForce 4 MX 440, and 128 MB DDR cabinet. I think the topic name says it all. Here at home the temperature is between 54 º and 57 º C, and when estaou using lots of CPU reaches peaks of 59. Do you think this temperature is acceptable I've read on some sites that officially AMD says that the limit of acceptable temperature of XP is 70 degrees, and there exists a margin of safety because in fact the processors are tested until the 80th which is the temperature limit it (I read it in a Hardware site). Oh, do not forget that I live in Ceará and here is already hot by nature (average 35 degrees all year round: twisted :: twisted:). I appreciate the help!
--- I had an athlon 1200 which was with the temperature around 64 º (oveclockado) without major problems. I changed to an Athlon 2000 and put it in a super-ventilated enclosure, is giving a maximum of 54.
I do not think there are problems with your athlon, they really tend to get very hot.
If you want to read more opinions about the SITE do a search for "temperature" has followed many posts on the subject. --- Dear
Alberich, I totally understand your problem, I live here beside the piaui, q and q as warm or warmer there! My XP1800 go to when I turn it 67 degrees in the afternoon and evening is 63 degrees with a full load it with a cabinet of three verbal, and two volcano7 thermaltake fans! Now when I take the lid of the case the temperature drops 6 degrees, plus two of my colleagues here also has the same problem! ---
Boy, I've been there once in Teresina and it seems that I was inside an oven! 8O 8O hottest place I've never seen that ese. : Twisted :: twisted: Have a Athon Piauí there is really a challenge. To cool it so it is with Liquid Nitrogen: twisted :: twisted:
--- My Athlon XP1700 is only 40. º even with intensive use. I put a Dragon ORB 3 ** Base 7000RPM (though I think not even have a 5000 already did), my office is a Cyber Mirror with 2 front and 1 rear fan. And I had to close the side because of the infernal noise that makes the cooler: evil: ... and yet the temperature has not changed ...
more details on: http://www.nns.hpg.ig.com.br/smake/index.html
---
here in london makes an average of 34 ° c ... hot ... and the volcano ** 6 was between 49-56 ° c .. m .. over this in
switched to a cooler master after he tested the binchinho .... he is better than the volcano, can you and half the noise ... now
naum of 53 passes at all .. until the blast has bought one of these is great ...
Galera follows. I just did an upgrade (I'm going to change the signature) for a ASUS A7S333, Athlon XP 1700, GForce 4 MX 440, and 128 MB DDR cabinet. I think the topic name says it all. Here at home the temperature is between 54 º and 57 º C, and when estaou using lots of CPU reaches peaks of 59. Do you think this temperature is acceptable I've read on some sites that officially AMD says that the limit of acceptable temperature of XP is 70 degrees, and there exists a margin of safety because in fact the processors are tested until the 80th which is the temperature limit it (I read it in a Hardware site). Oh, do not forget that I live in Ceará and here is already hot by nature (average 35 degrees all year round: twisted :: twisted:). I appreciate the help!
--- I had an athlon 1200 which was with the temperature around 64 º (oveclockado) without major problems. I changed to an Athlon 2000 and put it in a super-ventilated enclosure, is giving a maximum of 54.
I do not think there are problems with your athlon, they really tend to get very hot.
If you want to read more opinions about the SITE do a search for "temperature" has followed many posts on the subject. --- Dear
Alberich, I totally understand your problem, I live here beside the piaui, q and q as warm or warmer there! My XP1800 go to when I turn it 67 degrees in the afternoon and evening is 63 degrees with a full load it with a cabinet of three verbal, and two volcano7 thermaltake fans! Now when I take the lid of the case the temperature drops 6 degrees, plus two of my colleagues here also has the same problem! ---
Boy, I've been there once in Teresina and it seems that I was inside an oven! 8O 8O hottest place I've never seen that ese. : Twisted :: twisted: Have a Athon Piauí there is really a challenge. To cool it so it is with Liquid Nitrogen: twisted :: twisted:
--- My Athlon XP1700 is only 40. º even with intensive use. I put a Dragon ORB 3 ** Base 7000RPM (though I think not even have a 5000 already did), my office is a Cyber Mirror with 2 front and 1 rear fan. And I had to close the side because of the infernal noise that makes the cooler: evil: ... and yet the temperature has not changed ...
more details on: http://www.nns.hpg.ig.com.br/smake/index.html
---
here in london makes an average of 34 ° c ... hot ... and the volcano ** 6 was between 49-56 ° c .. m .. over this in
switched to a cooler master after he tested the binchinho .... he is better than the volcano, can you and half the noise ... now
naum of 53 passes at all .. until the blast has bought one of these is great ...
How to unlock the multiplier of my Athlon XP 1600
--- How to unlock the multiplier of my Athlon XP 1600
Which bridge should I call
--- In this tutorial of VR-Zone they teach: http://www.vr-zone.com/guides/AMD/AthlonXPUnlock/.
Regards, Andrew
< BR> ---
It is good to notice is not an easy task. ---
As already stated is a real surgery on the processor, and if not done properly, can even send your 'processor into space.
Evaluate the risks and see if it's worth! !
--- You must do this with enough time, quiet and not call attention to the wrong bridge.
--- Oops, I remembered another tutorial is a video of Tom's Hardware Guide. It has 10MB, the link is this one: http://www12.tomshardware.com/images...2_ocing_xp.zip.
Regards, Andrew
I can not play Nox.
--- Dear Friends, I try to enter
Guanto in Solo (singplayer) it gives me the following message:
"GROUND GAME, This game is only available in the primary installation. "
What can be
Grateful
Rodrigo
--- Do you have to install this game on your C partition, only it.
looks like the error of Slave Zero, where you had to have the CD-ROM in the letter D, but crashed at least qdo was well launched.
--- Dear Friend, My
partitioned this HD I can not put the CDROW "D".
Vc have another suggestion
Grateful
Rodrigo
---
Galera revived her topic 'cause yesterday I downloaded the NOX! : Lol:
gave an earful in the installation, but I walked around q ... tava not installing from a CD, then emulei (to using the Alcohol 120%) and CD 2 installed correctly and such ... enters the game good, but not ta accessing the SINGLE mode!
of this notice: THIS GAME IS
PRIMARY INSTALLATION ONLY avaiable!
Or something, I do not remember (I'll take and put SS!)
In multiplayer and tried ta normal! Section Nostalgia! : Lol :: lol:
who played just now gives me a force alas! plz! : Lol:
ss:
and type, the game IS in C: \ partition, better still, in the default installation!
Assinar:
Postagens (Atom)