HDs, Master / Slave and recognition problems!

--- Hello everyone, In my machine <BR> tenhos two Hds, a 20g Maxtor and a 40GB (mod. in signature). Both are config. to Cable Select. <BR> When I leave the 40 as master and 20 slave everything works normal, but when the 20 h of the master and the slave 40 bios does not recognize any HD! <BR> Well, I tried to configure via jumper to 20gb I put the 40gb in master and slave, did not find the bios of the two in 40gb.botei Master, only for testing, tah crashed. q might be happening These Hds worked together before, the errors are recent. <BR> Thanks <BR> [] 's <BR> PS: What is the position of the SLAVE D-740-6l, just to make sure ---' Vc is using one-way cable qtas <BR> already tested another cable --- I'm not sure, but I think the 80vias h. I'll try with another cable tomorrow. <BR> Thanks <BR> [] 's ~ --- I'm pretty sure a cable 80vias eh, tomorrow I will have another cable in hand and I can do another test. --- Up and E-mail warning! --- Its HDS are different brands <BR> If different brands, depending on the type of HD, assuming that the HD is 20GB and 40GB 5th ULTRA ULTRA 6 is the ultra 5 works 100 MB / S and Ultra 6 (latest generation) works to 133 MB / S. When you put the 20 GB "MASTER" and the 40 GB "SLAVE" hardware conflicts. <BR> This case is very common. <BR> Right is to let the 40 GB to "MASTER" and the 20 GB "SLAVE" <BR> Blz <BR> .. Hope this helps, <BR> spoke. : Wink: